CMM-10 Multimeter
5 in stock
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
₨11,844 ₨14,478
5 in stock
CompareThe most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
| Weight | 0.2 kg |
|---|---|
| Dimensions | 14 × 7 × 4 cm |
Frequency measurement
| Range | Resolution | Accuracy |
| 5,000 Hz | 0,001 Hz | ±(1,5% m.v. + 5 digits) |
| 50,00 Hz | 0,01 Hz | |
| 500,0 Hz | 0,1 Hz | ±(1,2% m.v. + 3 digits) |
| 5,000 kHz | 0,001 kHz | |
| 50,00 kHz | 0,01 kHz | |
| 500,0 kHz | 0,1 kHz | |
| 5,000 MHz | 0,001 MHz | ±(1,5% m.v. + 4 digits) |
| 10,00 MHz | 0,01 MHz |
- sensitivity: ≥8 V RMS
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,1…99,9% | 0,1% | ±(1,2% m.v. + 2 digits) |
- sensitivity: ≥8 V RMS,
- pulse width: 100µs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy* |
| -20°C…+760°C | 1°C | ±(3% m.v. + 5°C, 9°F) |
| -4°F…+1400°F | 1°F |
*) probe (K type) accuracy not included
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(0,5% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,2% m.v. + 2 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(1,5% m.v. + 2 digits) |
- input impedance: 7,8 MΩ
AC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 70 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 3 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 3 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(2,0% m.v. + 4 digits) |
- input impedance: 7,8 MΩ,
- frequency range: 50…400 Hz.
DC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,0% m.v. + 3 digits) |
| 4 000 μA | 1 μA | ±(1,5% m.v. + 3 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(2,5% m.v. + 5 digits) |
| 10,00 A | 0,01 A |
AC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,5% m.v. + 5 digits) |
| 4 000 μA | 1 μA | ±(1,8% m.v. + 5 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(3,0% m.v. + 7 digitgs) |
| 10,00 A | 0,01 A |
- frequency range: 50…400 Hz.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,0 Ω | 0,1 Ω | ±(1,2% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,0% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,2% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | |
| 4,000 MΩ | 0,001 MΩ | |
| 40,00 MΩ | 0,01 MΩ | ±(2,0% m.v. + 3 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,00 nF | 0,01 nF | ±(5,0% m.v. + 7 digits) |
| 400,0 nF | 0,1 nF | ±(3,0% m.v. + 5 digits) |
| 4,000 μF | 0,001 μF | |
| 40,00 μF | 0,01 μF | |
| 100,0 μF | 0,1 μF | ±(5,0% m.v. + 5 digits) |
“m.v” = measured value
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT II 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,3 mA, U0 = 1,5 V DC
- continuity test: I<0,3 mA, sound signal for R<50 Ω
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 7,8 MΩ (V AC/DC)
- display: 5000 counts LCD display with function indication
- dimensions: 138 x 68 x 37 mm
- weight: approx. 210 g
- fuses: mA, µA range: 0,5 A/250 V fast; A range: 10 A/250 V fast
- auto power OFF: 30 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Rated operational conditions:
- operating temperature: 0…+50°C at <70% rel. humidity
- storage temperature: -20…+60°C at <80% rel. humidity
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-10 Multimeter”
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
DC Power Supplies
UDP1306C Industrial Linear DC Power Supply
Features of UDP1306C Industrial Linear DC Power Supply:
- 4-digit high precision display
- OVP OCP OTP protection
- Output setting viewable
- Remote control (output ON/OFF)
- Shutdown memory/keypad lock
- Intelligent cooling fan
- USB charging interface
- RS232 program-controlled communication
- USB device communication
- 5 sets of data storage
SKU: n/a -
Related products
-
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
Multimeters
UT18B Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a -
Multimeters
UT61A Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
1、Large LCD screen；2、High resolution analog pointer display；3、Full range overload protection；4、Data hold, REL, Peak value measurement；5、Low battery indication, backlight, and sleep mode；6、External interface supports RS-232C and USB cable.
UT61 Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.SKU: n/a
There are no reviews yet.