CMP-1006 Digital Clamp-on multimeter
5 in stock
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
₨31,587 ₨34,221
5 in stock
Compare(TRUE RMS) up to 1000 A.
Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
AC/DC voltage measurement (TRUE RMS) up to 600 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 40.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Duty cycle measurement.
Diode test.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 23 × 8 × 5 cm |
Electric security:
- measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- display: 6600 counts, backlit LCD
- continuity test: threshold 40 Ω; test current < 0,5 mA
- diode test: test current of 0,3 mA, typical open circuit voltage < 3 V DC, typical
- low battery indication: BAT displayed
- over range indication: 0L displayed
- sampling rate: 2 times per second
- INRUSH: integration time 100 ms
- temperature sensor: type K thermocouple
- input impedance: 10 MΩ (V DC and V AC)
- AC bandwidth: 50…400 Hz (A AC and V AC)
- auto power OFF: approx. 25 min.
- dimensions: 229 x 80 x 49 mm
- weight: 303 g
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
- quality standard: ISO 9001
Rated operational conditions:
- internal clamp diameters: d1 = 36 mm/d2 = 52 mm
- operating temperature: +5…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 31°C decreasing linearly to 50% at 40°C
- storage humidity: <80%
- operating altitude: max 2000 m
AC/DC current measurement (TRUE RMS)
| Range | Resolution | Accuracy (DC) | Accuracy (AC) |
|---|---|---|---|
| 0…659,9 A | 0,1 A | ±(2,5% m.v. +5 dgt) | ±(2,5% m.v + 8 dgt) for f = 50…60 Hz |
| 660…1000 A | 1 A | ±(2,8% m.v. +8 dgt) | ±(2,8% m.v. + 8 dgt) for f = 50…60 Hz |
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…6,599 V | 0,001 V | ±(1,5% m.v. + 3 dgt) |
| 6,60…65,99 V | 0,01 V | ±(1,5% m.v. + 3 dgt) |
| 66,0…600,0 V | 0,1 V | ±(1,5% m.v. + 3 dgt) |
AC voltage measurement (TRUE RMS)
| Range | Resolution | Accuracy |
|---|---|---|
| 0…6,599 V | 0,001 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
| 6,60…65,99 V | 0,01 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
| 66,0…600,0 V | 0,1 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…659,9 Ω | 0,1 Ω | ±(1,0% m.v. + 4 dgt) |
| 0,660…6,599 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) |
| 6,60…65,99 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) |
| 66,0…659,9 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) |
| 0,660…6,599 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) |
| 6,60…66,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) |
Frequency measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 30,0…999,9 Hz | 0,1 Hz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
| 1,000…9,999 kHz | 0,001 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
| 10,00…15,00 kHz | 0,01 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
Temperature measurement
| Range | Resolution | Accuracy |
|---|---|---|
| -20…760°C | 0,1°C | ±(3,0% m.v. + 5°C) |
| -4…1400°F | 0,1°F | ±(3,0% m.v. + 9°F) |
Duty cycle measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 10,0…94,9% | 0,1% | ±(1,2% m.v. + 2 dgt) |
- pulse width: 100μs…100 ms,
- frequency range: 30 Hz…5 kHz,
- sensitivity: 30 Hz…5 kHz: 10 Vrms, 5 kHz…15 kHz: 40 Vrms.
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-1006 Digital Clamp-on multimeter”
-
Multimeters
UT81C Scope Digital Multimeter
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitanceSKU: n/a -
Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Related products
-
-
Clamp Meters
UT210E ACA DCA Digital Clamp Meters
Main Features
1. Auto range, 2~3/s sampling rate
2. True RMS measurement
3. VFC, frequency conversion function
4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw
5. Zero mode
6. LCD backlight, data hold
7. Auto power off, low battery indication and overload protection
8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)
9. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a
There are no reviews yet.