CMP-1006 Digital Clamp-on multimeter
5 in stock
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
₨31,587 ₨34,221
5 in stock
Compare(TRUE RMS) up to 1000 A.
Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
AC/DC voltage measurement (TRUE RMS) up to 600 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 40.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Duty cycle measurement.
Diode test.
| Weight | 0.3 kg |
|---|---|
| Dimensions | 23 × 8 × 5 cm |
Electric security:
- measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- display: 6600 counts, backlit LCD
- continuity test: threshold 40 Ω; test current < 0,5 mA
- diode test: test current of 0,3 mA, typical open circuit voltage < 3 V DC, typical
- low battery indication: BAT displayed
- over range indication: 0L displayed
- sampling rate: 2 times per second
- INRUSH: integration time 100 ms
- temperature sensor: type K thermocouple
- input impedance: 10 MΩ (V DC and V AC)
- AC bandwidth: 50…400 Hz (A AC and V AC)
- auto power OFF: approx. 25 min.
- dimensions: 229 x 80 x 49 mm
- weight: 303 g
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
- quality standard: ISO 9001
Rated operational conditions:
- internal clamp diameters: d1 = 36 mm/d2 = 52 mm
- operating temperature: +5…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 31°C decreasing linearly to 50% at 40°C
- storage humidity: <80%
- operating altitude: max 2000 m
AC/DC current measurement (TRUE RMS)
| Range | Resolution | Accuracy (DC) | Accuracy (AC) |
|---|---|---|---|
| 0…659,9 A | 0,1 A | ±(2,5% m.v. +5 dgt) | ±(2,5% m.v + 8 dgt) for f = 50…60 Hz |
| 660…1000 A | 1 A | ±(2,8% m.v. +8 dgt) | ±(2,8% m.v. + 8 dgt) for f = 50…60 Hz |
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…6,599 V | 0,001 V | ±(1,5% m.v. + 3 dgt) |
| 6,60…65,99 V | 0,01 V | ±(1,5% m.v. + 3 dgt) |
| 66,0…600,0 V | 0,1 V | ±(1,5% m.v. + 3 dgt) |
AC voltage measurement (TRUE RMS)
| Range | Resolution | Accuracy |
|---|---|---|
| 0…6,599 V | 0,001 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
| 6,60…65,99 V | 0,01 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
| 66,0…600,0 V | 0,1 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…659,9 Ω | 0,1 Ω | ±(1,0% m.v. + 4 dgt) |
| 0,660…6,599 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) |
| 6,60…65,99 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) |
| 66,0…659,9 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) |
| 0,660…6,599 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) |
| 6,60…66,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) |
Frequency measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 30,0…999,9 Hz | 0,1 Hz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
| 1,000…9,999 kHz | 0,001 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
| 10,00…15,00 kHz | 0,01 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle |
Temperature measurement
| Range | Resolution | Accuracy |
|---|---|---|
| -20…760°C | 0,1°C | ±(3,0% m.v. + 5°C) |
| -4…1400°F | 0,1°F | ±(3,0% m.v. + 9°F) |
Duty cycle measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 10,0…94,9% | 0,1% | ±(1,2% m.v. + 2 dgt) |
- pulse width: 100μs…100 ms,
- frequency range: 30 Hz…5 kHz,
- sensitivity: 30 Hz…5 kHz: 10 Vrms, 5 kHz…15 kHz: 40 Vrms.
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-1006 Digital Clamp-on multimeter”
-
Phase Detector Meters
TKF-12 Phase Sequence Tester
Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V) AC by LED signalization.
Operation in the power network with frequency range 10…70 Hz.
Indication of the voltage presence in the particular phases by neon lamps signalization.
Power supply from the tested network (continuous operation to 15 minutes for max. voltage).
Protection against faulty indication of field rotation.SKU: n/a -
Oscilloscopes
UTD2102CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Laser Distance Meters
LM50D Laser Distance Meter (Curvature Edition)
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, HD display4. Auto voice and audio indication5. Curvature measurement, test curve length via the roller6. Auto power off after 3 minutes without operation7. Convenient angle measurement via electronic levelingSKU: n/a -
Clamp Meters
CLAMP METER AC DC CM 2016
OverviewEssential details- Place of Origin:
-
Guangdong, China
- Brand Name:
-
vici
- Model Number:
-
CM-2016
- Display Type:
-
Digital Only
- Measuring Current Range:
-
60A/600A/800A
- Measuring Voltage Range:
-
600mV/6V/60V/600V
- Measuring Resistance Range:
-
600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
- Measuring Capacitance Range:
-
6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF
- Measuring Inductance Range:
-
/
- Operating Temperature:
-
23±5℃
- Dimensions:
-
185*65*32mm
- Weight:
-
200g(including the batteries)
- Backlight display/Clamp light dispaly:
-
YES
- NCV:
-
YES
- Diode test:
-
YES
- clamp open:
-
28mm
- power supply:
-
2pcs 1.5V batteries
- Sampling rate:
-
3 times/second
- AC frequency response:
-
Current 50-60Hz/ voltage 50-400Hz
- Operation method:
-
Auto range
- OEM service:
-
Available
- Product Name:
-
Vicimeter CM-2016 AC/DC 3 5/6 Digital Clamp Meter
SKU: n/a
Related products
-
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT216B 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216B (main features)- 1、600A AC current measurement；
- 2、True RMS response for ACV and ACA；
- 3、99.99mF capacitance measurement；
- 4、V.F.C function for measuring signal at variable frequency ；
- 5、Non-contact voltage detection with LED indication；
- 6、Flashlight for working at dark environment.
SKU: n/a
There are no reviews yet.