CMP-2000 Digital clamp-on multimeter
5 in stock
It provides:
- AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
- Measurement of INRUSH current in start-up phase of electrical device.
- AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
- Resistance measurement and continuity test:
– continuity test with acoustic signalling (beeper) for resistance below 30 Ω. - Capacitance measurement.
- Temperature measurement (Fahrenheit or Celsius).
- Frequency measurement.
- Duty cycle measurement.
- Diode test.
₨61,859 ₨65,809
5 in stock
Compare-
Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.
| Weight | 0.6 kg |
|---|---|
| Dimensions | 28 × 11 × 5 cm |
AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
Measurement of INRUSH current in start-up phase of electrical device.
AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 30 Ω.
Capacitance measurement
Temperature measurement (Fahrenheit or Celsius).
Frequency measurement.
Duty cycle measurement.
Diode test.
Additionally:
- safe, insulated measuring clamp,
- autoranging,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,
- „MAX/MIN” function,
- over range indication,
- „AUTO-OFF” function after 30 min.
Electric security:
- measurement category: CAT IV 600 V acc. to EN 61010 – 1,
- protection class acc. to EN 60529: IP20,
Other technical data:
- power supply, 9 V battery type 6LR61,
- display: 6600 counts, backlit LCD,
- continuity test: threshold 30 Ω,
- diode test: test current of 0,8 mA , typical open circuit voltage 3,2 V DC, typical,
- low battery indication: BAT displayed,
- over range indication: ‘OL’ displayed,
- temperature sensor: type K thermocouple,
- input impedance: ca.10 MΩ (V DC and V AC),
- AC bandwidth: 50…500 Hz,
- auto power OFF: 30 minutes,
- dimensions: 281 x 108 x 53 mm,
- weight: 570 g (with battery),
- accordance with following standards: EN 61010 – 1, EN 61010 – 2-032.
Rated operational conditions:
- able to open the clamp: Ø 57 mm wire 70 x 18 mm bus bar,
- operating temperature: 0…+50 °C,
- storage temperature: -20…+60 °C,
- operating altitude: max 2000 m.
DC current measurement
| Range | Resolution | Accuracy |
| 0,0…659,9 A | 0,1 A | ±(2,0% m.v. + 5 digits) |
| 660…2000 A | 1 A | ±(3,0% m.v. + 5 digits) for 660…1000 A |
| ±(5,0% m.v. + 5 digits) for 1000…2000 A |
AC current measurement (TRUE RMS)
| Range | Resolution | Accuracy |
| 0,0…659,9 A | 0,1 A | ±(2,0% m.v. + 10 digits) for 50…60 Hz |
| ±(3,0% m.v. + 10 digits) for 61…400 Hz | ||
| 660…1500 A | 1 A | ±(2,5% m.v. + 10 digits) for 50…60 Hz i 660…1000 A |
| ±(3,5% m.v. + 10 digits) for 61…400 Hz and 660…1000 A |
||
| ±(5,0% m.v. + 10 digits) for 50…400 Hz and 1000…1500 |
DC voltage measurement
| Range | Resolution | Accuracy |
| 0,000…6,599 V | 0,001 V | ±(0,5% m.v. + 2 digits) |
| 6,60…65,99 V | 0,01 V | |
| 66,0…659,9 V | 0,1 V | |
| 660…1000 V | 1 V |
AC voltage measurement (true RMS)
| Range | Resolution | Accuracy |
| 0,000…6,599 V | 0,001 V | ±(1,5% m.v. + 8 digits) for 50…500 Hz |
| 6,60…65,99 V | 0,01 V | |
| 66,0…659,9 V | 0,1 V | |
| 660…750 V | 1 |
Resistance measurement
| Range | Resolution | Accuracy |
| 0,0…659,9 Ω | 0,1 Ω | ±(1,0% m.v. + 5 digits) |
| 0,660…6,599 kΩ | 0,001 kΩ | |
| 6,60…65,99 kΩ | 0,01 kΩ | |
| 66,0…659,9 kΩ | 0,1 kΩ | |
| 0,660…6,599 MΩ | 0,001 MΩ | ±(2,0% m.v. + 5 digits) |
| 6,60…66,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 0,0…6,599 nF | 0,001 nF | ±(3,0% m.v. + 30 digits) |
| 6,60…65,99 nF | 0,01 nF | ±(3,0% m.v. + 10 digits) |
| 66,0…559,9 nF | 0,1 nF | ±(3,0% m.v. + 30 digits) |
| 6,600…59,999 µF | 0,001 µF | ±(3,0% m.v. + 10 digits) |
| 66,00…659,99 µF | 0,01 µF | |
| 660…659,999 µF | 0,100 µF | |
| 0,660…6,600 mF | 0,001 mF |
Frequency measurement
| Range | Resolution | Accuracy |
| 10…65,99 Hz | 0,01 Hz | ±(0,1% m.v. + 5 digits) |
| 66,0…659,9 Hz | 0,1 Hz | |
| 0,660…6,599 kHz | 0,001 kHz | |
| 6,60…65,99 kHz | 0,01 kHz | |
| 66,0…659,9 kHz | 0,1 kHz | |
| 0,660…1,000 MHz | 0,001 MHz |
Temperature measurement
| Range | Resolution | Accuracy |
| -20…0°C | 1°C | ±(2,0% m.v. + 3°C) |
| 0…399°C | ±(1,0% m.v. + 2°C) | |
| 400…1000°C | ±(2,0% m.v. + 3°C) | |
| -4…31°F | 1°F | ±(2,0% m.v. + 6°F) |
| 32..749°F | ±(1,0% m.v. + 4°F) | |
| 750…1832°F | ±(2,0% m.v. + 6°F) |
Duty cycle measurement
| ange | Resolution | Accuracy |
| 5…95% | 0,1% | ±(2,0% m.v. + 10 digits) |
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-2000 Digital clamp-on multimeter”
-
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a -
Laser Distance Meters
LM40 Laser Distance Meter
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, multiple angle HD display5. Physical and electronics leveler6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more7. Auto power off after 3 minutes without operationSKU: n/a -
-
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000
Related products
-
Clamp Meters
UT216C 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216C (main features)- 1、600A AC and DC current measurement
- 2、True RMS response for ACV and ACA
- 3、Inrush current function for AC current measurement
- 4、V.F.C function for measuring signal at variable frequency
- 5、Non-contact voltage detection with LED indication
- 6、Flashlight for working at dark environment
- 7、Other functions include Capacitance, Frequency and Temperature measurements
SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a -
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
There are no reviews yet.