-6%

Clamp Meters

CMP-2000 Digital clamp-on multimeter

Name: CMP-2000 Digital clamp-on multimeter
SKU: 5565
Price: 61859 PKR
Availability: InStock

Availability:

5 in stock

Add to Wishlist

Compare

It provides:

AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
Measurement of INRUSH current in start-up phase of electrical device.
AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
Resistance measurement and continuity test:
– continuity test with acoustic signalling (beeper) for resistance below 30 Ω.
Capacitance measurement.
Temperature measurement (Fahrenheit or Celsius).
Frequency measurement.
Duty cycle measurement.
Diode test.

₨61,859 ~~₨65,809~~

5 in stock

Compare

Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm
The instrument has an electronic overload protection of all functions and ranges.

Category: Clamp Meters

Weight	0.6 kg
Dimensions	28 × 11 × 5 cm

AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.

Measurement of INRUSH current in start-up phase of electrical device.

AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.

Resistance measurement and continuity test:

continuity test with acoustic signalling (beeper) for resistance below 30 Ω.

Capacitance measurement

Temperature measurement (Fahrenheit or Celsius).

Frequency measurement.

Duty cycle measurement.

Diode test.

Additionally:

safe, insulated measuring clamp,
autoranging,
„DATA HOLD” function, for holding measured values,
backlit LCD,
„DC ZERO” mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored „zero” value,
„MAX/MIN” function,
over range indication,
„AUTO-OFF” function after 30 min.

Electric security:

measurement category: CAT IV 600 V acc. to EN 61010 – 1,
protection class acc. to EN 60529: IP20,

Other technical data:

power supply, 9 V battery type 6LR61,
display: 6600 counts, backlit LCD,
continuity test: threshold 30 Ω,
diode test: test current of 0,8 mA , typical open circuit voltage 3,2 V DC, typical,
low battery indication: BAT displayed,
over range indication: ‘OL’ displayed,
temperature sensor: type K thermocouple,
input impedance: ca.10 MΩ (V DC and V AC),
AC bandwidth: 50…500 Hz,
auto power OFF: 30 minutes,
dimensions: 281 x 108 x 53 mm,
weight: 570 g (with battery),
accordance with following standards: EN 61010 – 1, EN 61010 – 2-032.

Rated operational conditions:

able to open the clamp: Ø 57 mm wire 70 x 18 mm bus bar,
operating temperature: 0…+50 °C,
storage temperature: -20…+60 °C,
operating altitude: max 2000 m.

DC current measurement

Range	Resolution	Accuracy
0,0…659,9 A	0,1 A	±(2,0% m.v. + 5 digits)
660…2000 A	1 A	±(3,0% m.v. + 5 digits) for 660…1000 A
660…2000 A	1 A	±(5,0% m.v. + 5 digits) for 1000…2000 A

AC current measurement (TRUE RMS)

Range	Resolution	Accuracy
0,0…659,9 A	0,1 A	±(2,0% m.v. + 10 digits) for 50…60 Hz
		±(3,0% m.v. + 10 digits) for 61…400 Hz
660…1500 A	1 A	±(2,5% m.v. + 10 digits) for 50…60 Hz i 660…1000 A
		±(3,5% m.v. + 10 digits) for 61…400 Hz and 660…1000 A
		±(5,0% m.v. + 10 digits) for 50…400 Hz and 1000…1500

DC voltage measurement

Range	Resolution	Accuracy
0,000…6,599 V	0,001 V	±(0,5% m.v. + 2 digits)
6,60…65,99 V	0,01 V
66,0…659,9 V	0,1 V
660…1000 V	1 V

AC voltage measurement (true RMS)

Range	Resolution	Accuracy
0,000…6,599 V	0,001 V	±(1,5% m.v. + 8 digits) for 50…500 Hz
6,60…65,99 V	0,01 V
66,0…659,9 V	0,1 V
660…750 V	1

Resistance measurement

Range	Resolution	Accuracy
0,0…659,9 Ω	0,1 Ω	±(1,0% m.v. + 5 digits)
0,660…6,599 kΩ	0,001 kΩ
6,60…65,99 kΩ	0,01 kΩ
66,0…659,9 kΩ	0,1 kΩ
0,660…6,599 MΩ	0,001 MΩ	±(2,0% m.v. + 5 digits)
6,60…66,00 MΩ	0,01 MΩ	±(3,5% m.v. + 5 digits)

Capacitance measurement

Range	Resolution	Accuracy
0,0…6,599 nF	0,001 nF	±(3,0% m.v. + 30 digits)
6,60…65,99 nF	0,01 nF	±(3,0% m.v. + 10 digits)
66,0…559,9 nF	0,1 nF	±(3,0% m.v. + 30 digits)
6,600…59,999 µF	0,001 µF	±(3,0% m.v. + 10 digits)
66,00…659,99 µF	0,01 µF
660…659,999 µF	0,100 µF
0,660…6,600 mF	0,001 mF

Frequency measurement

Range	Resolution	Accuracy
10…65,99 Hz	0,01 Hz	±(0,1% m.v. + 5 digits)
66,0…659,9 Hz	0,1 Hz
0,660…6,599 kHz	0,001 kHz
6,60…65,99 kHz	0,01 kHz
66,0…659,9 kHz	0,1 kHz
0,660…1,000 MHz	0,001 MHz

Temperature measurement

Range	Resolution	Accuracy
-20…0°C	1°C	±(2,0% m.v. + 3°C)
0…399°C		±(1,0% m.v. + 2°C)
400…1000°C		±(2,0% m.v. + 3°C)
-4…31°F	1°F	±(2,0% m.v. + 6°F)
32..749°F		±(1,0% m.v. + 4°F)
750…1832°F		±(2,0% m.v. + 6°F)

Duty cycle measurement

ange	Resolution	Accuracy
5…95%	0,1%	±(2,0% m.v. + 10 digits)

„m.v.”- measured value

Brand

SONEL

Based on 0 reviews

0.0 overall

Be the first to review “CMP-2000 Digital clamp-on multimeter” Cancel reply

There are no reviews yet.

Moisture Testers
MS6900S Moisture Tester
Moisture Testers
MS6900S Moisture Tester

0 out of 5
(0)

Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick

SKU: n/a
₨9,475 ~~₨10,529~~
Add to cart

Add to Wishlist

Compare
Power Quality Analyzer
PQM-707 Power Quality Analyzer
Power Quality Analyzer
PQM-707 Power Quality Analyzer

0 out of 5
(0)
Features:

7″ touch screen – intuitive operating

CAT IV 600V – high safety

all parameters acc. to class S – high accuracy of measurements

Li-Ion rechargeable battery – higher mobility

removable memory card – recording data with no restrictions

Possible measurements:

Measurements according to EN 50160,

Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,

Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,

Crest factor for voltage and current,

Frequency from 40 Hz to 70 Hz ,

Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),

Power recording:

Budeanu method,

IEEE 1459,

Active, reactive, apparent energy,

Power factor, cosφ, tgφ,

Up to 50th harmonics for voltage and current,

Total Harmonic Distortion (THD) for voltage and current,

Short-term (PST) and long-term (PLT) flicker,

Unbalance of voltage and current,

Current and voltage events registration including waveforms and RMS graphs half period,

Inrush current

Calculator of energy tariffs

ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a
₨0
Add to cart

Add to Wishlist

Compare
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers

0 out of 5
(0)

UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.

SKU: n/a
₨0
Read more

Add to Wishlist

Compare
Cutters
Pride Cutter Plier 6″ With Rubber Grip Handle
Cutters
Pride Cutter Plier 6″ With Rubber Grip Handle
China Brand

0 out of 5
(0)

Pride Cutter Plier 6″ With Rubber Grip Handle

SKU: n/a
₨550 ~~₨600~~
Add to cart

Add to Wishlist

Compare
Multimeters
Fluke 18B+ Digital Multimeter
Multimeters
Fluke 18B+ Digital Multimeter

0 out of 5
(0)

Feature:

-New Function:Frequency Test

-New Desgin: A Large LCD than FLUKE 18B, with a high brightness LCD Back light

-Two Mode LED Test :

-DMM LED Socket Test Mode .

-UUT(PCBA) LED Test Mode(using test lead).

-Light up LED without considering the polarity.

-Voltage,Resistance,Continuity Testing,Capacitance Test.

-Data Hold,Diode Test.

-Frequency and Duty Cycle.

-MAX Input Current 10A.

SKU: n/a
₨30,270 ~~₨32,905~~
Read more

Add to Wishlist

Compare
Clamp Meters
CLAMP METER AC BM 818
Clamp Meters
CLAMP METER AC BM 818

0 out of 5
(0)
Features: 1. Multifunctional, can measure ac/dc voltage, ac current, resistance, capacitance, ncv, diode, continuity. 2. Portable Design: Small and pocketable, easy to carry. 3. Stable performance, high precision, large LCD backlight screen, large capacitance range. 4. Safe and reliable, non-contact ncv tester. 5. There is a tinnitus indicator.
SKU: n/a
₨2,747 ~~₨3,270~~
Add to cart

Add to Wishlist

Compare

CMP-2000 Digital clamp-on multimeter

Brand

SONEL

Based on 0 reviews

Be the first to review “CMP-2000 Digital clamp-on multimeter” Cancel reply

MS6900S Moisture Tester

MS6900S Moisture Tester

PQM-707 Power Quality Analyzer

PQM-707 Power Quality Analyzer

UT278A Clamp Earth Ground Testers

UT278A Clamp Earth Ground Testers

Pride Cutter Plier 6″ With Rubber Grip Handle

Pride Cutter Plier 6″ With Rubber Grip Handle

Fluke 18B+ Digital Multimeter

Fluke 18B+ Digital Multimeter

CLAMP METER AC BM 818

CLAMP METER AC BM 818

UT222 2500A ACA DCA Digital Clamp Meters

UT222 2500A ACA DCA Digital Clamp Meters

UT219E ACA Professional Clamp Meters

UT219E ACA Professional Clamp Meters

UT216B 600A True RMS Digital Clamp Meters

UT216B 600A True RMS Digital Clamp Meters

UT220 2000A ACA Digital Clamp Meters

UT220 2000A ACA Digital Clamp Meters

CMP-2000 Digital clamp-on multimeter

Brand

SONEL

Based on 0 reviews

Be the first to review “CMP-2000 Digital clamp-on multimeter” Cancel reply

MS6900S Moisture Tester

MS6900S Moisture Tester

PQM-707 Power Quality Analyzer

PQM-707 Power Quality Analyzer

UT278A Clamp Earth Ground Testers

UT278A Clamp Earth Ground Testers

Pride Cutter Plier 6″ With Rubber Grip Handle

Pride Cutter Plier 6″ With Rubber Grip Handle

Fluke 18B+ Digital Multimeter

Fluke 18B+ Digital Multimeter

CLAMP METER AC BM 818

CLAMP METER AC BM 818

Related products

UT222 2500A ACA DCA Digital Clamp Meters

UT222 2500A ACA DCA Digital Clamp Meters

UT219E ACA Professional Clamp Meters

UT219E ACA Professional Clamp Meters

UT216B 600A True RMS Digital Clamp Meters

UT216B 600A True RMS Digital Clamp Meters

UT220 2000A ACA Digital Clamp Meters

UT220 2000A ACA Digital Clamp Meters