-
×
YTH 1041 Stripping pliers Multifunction Various sizes wire stripper
- Vendor:
superworld
Subtotal: ₨500
-11%
Clamp Meters
CMP-401 Digital Clamp-on multimeter
Availability:
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
AUTO-OFF function.
₨25,664 ₨28,956
5 in stock
CompareDC current measurement and AC current.
AC/DC voltage measurement up to 600 V.Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement .
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
DC current measurement and AC current. .
AC/DC voltage measurement up to 600 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50 Ω.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement
Diode test.
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „REL” function,
- over range indication,
- „AUTO-OFF” function.
Electric security:
- measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- display: 4000 counts, backlit LCD
- continuity test: I<0,5 mA, sound signal for R<50 Ω
- diode test: I = 0,3 mA, U0 = 1,5 V DC
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC and V AC)
- clamp size: opening 30 mm (1,2”)
- auto power OFF: approx. 30 min.
- dimensions: 197 x 70 x 40 mm
- weight: 183 g
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
- quality standard: ISO 9001
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 31°C; decreasing linearly to 50% at 40°C
- operating altitude: max 2000 m
Temperature measurement
| Range | Accuracy* |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| 10 Hz … 10 kHz | ±(1,5% m.v. + 2 digits) |
- csensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
- frequency range: 50…60 Hz.
DC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 5 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 5 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 5 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 5 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 5 digits) |
- frequency range: 50…400 Hz.
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 2 digits) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 digits) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 digits) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 nF | 0,01 nF | ±(4% m.v. + 20 digits) |
| 400,0 nF | 0,1 nF | ±(3% m.v. + 5 digits) |
| 4,000 nF | 0,001 μF | ±(3% m.v. + 5 digits) |
| 40,00 nF | 0,01 μF | ±(3% m.v. + 5 digits) |
| 100,0 nF | 0,1 μF | ±(4% m.v. + 10 digits) |
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-401 Digital Clamp-on multimeter”
-
Multimeters
CMM-10 Multimeter
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
SKU: n/a -
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a -
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a -
Thermal Imagers
UNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC
Thermal ImagersUNI-T UTi712S Economical Handheld Infrared Thermal Imaging Camera with Buzzer Alarm Temperature Range -20ºC~400ºC
Product Features of UTi712S Thermal Imager
- 2.8″ LCD screen
- Infrared resolution: 120 x 90
- Temperature measurement range: -20ºC~400ºC
- Temperature Compensation
- Photograph function with SD card storage
- PC analysis software
- Buzzer/Flashlight alarm
- Auto capture of High/Low temperature
- With Laser Indicator
- Flashlight
- 1/4″ tripod mounting hole
- IP54/2m drop proof
SKU: n/a
Related products
-
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
MT87 3 1/2 Digits LCD Digital Clamp Meter
This meter features a portable design, 31/2 LCD display and 25mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, diode and continuity buzzer. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual.
SKU: MT 87 CLAMP METER -
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
There are no reviews yet.