-
×
YIHUA 937D Repairing Soldering Iron
- Vendor:
superworld
Subtotal: ₨5,626
-11%
Clamp Meters
CMP-401 Digital Clamp-on multimeter
Availability:
5 in stock
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- REL function,
- over range indication,
AUTO-OFF function.
₨25,664 ₨28,956
5 in stock
CompareDC current measurement and AC current.
AC/DC voltage measurement up to 600 V.Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement .
Diode test.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 20 × 7 × 4 cm |
DC current measurement and AC current. .
AC/DC voltage measurement up to 600 V.
Resistance measurement and continuity test:
- continuity test with acoustic signalling (beeper) for resistance below 50 Ω.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Capacitance measurement
Diode test.
Additionally:
- safe, insulated measuring clamps,
- double molded housing,
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- backlit LCD,
- „REL” function,
- over range indication,
- „AUTO-OFF” function.
Electric security:
- measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- display: 4000 counts, backlit LCD
- continuity test: I<0,5 mA, sound signal for R<50 Ω
- diode test: I = 0,3 mA, U0 = 1,5 V DC
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC and V AC)
- clamp size: opening 30 mm (1,2”)
- auto power OFF: approx. 30 min.
- dimensions: 197 x 70 x 40 mm
- weight: 183 g
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
- quality standard: ISO 9001
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 31°C; decreasing linearly to 50% at 40°C
- operating altitude: max 2000 m
Temperature measurement
| Range | Accuracy* |
|---|---|
| -20,0…760°C | ±(3% m.v. + 5°C) |
| -4,0…1400°F | ±(3% m.v. + 9°F) |
*probe (K type) accuracy not included
Frequency measurement
| Range | Accuracy |
|---|---|
| 10 Hz … 10 kHz | ±(1,5% m.v. + 2 digits) |
- csensitivity: 100 V (<50 Hz), 50 V (50…400 Hz); 15 V (401 Hz…10 kHz)
AC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 8 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
- frequency range: 50…60 Hz.
DC current measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 A | 0,01 A | ±(2,5% m.v. + 5 digits) |
| 400,0 A | 0,1 A | ±(2,8% m.v. + 5 digits) |
AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 30 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 5 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 5 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 5 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 5 digits) |
- frequency range: 50…400 Hz.
DC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 mV | 0,1 mV | ±(0,8% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,5% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 2 digits) |
| 400,0 V | 0,1 V | ±(1,5% m.v. + 2 digits) |
| 600,0 V | 1 V | ±(2% m.v. + 2 digits) |
Resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 400,0 Ω | 0,1 Ω | ±(1,0% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 digits) |
| 4,000 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 digits) |
| 40,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 40,00 nF | 0,01 nF | ±(4% m.v. + 20 digits) |
| 400,0 nF | 0,1 nF | ±(3% m.v. + 5 digits) |
| 4,000 nF | 0,001 μF | ±(3% m.v. + 5 digits) |
| 40,00 nF | 0,01 μF | ±(3% m.v. + 5 digits) |
| 100,0 nF | 0,1 μF | ±(4% m.v. + 10 digits) |
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMP-401 Digital Clamp-on multimeter”
-
Clamp Meters
UT207A Digital Clamp Meters (Discontinued)
Features of UT207/A to UT209/A Series 1000A Digital Clamp Meters
Certificates: CE, RoHS
● 1000A AC/DC current measurement, 3 times/s sampling rate
● Auto/manual ranges selectable (UT207A/UT208A/UT209A)
● True RMS (UT207/UT208/UT209/UT209A)
● Analog bar graph (UT209)
● Inrush current (UT207/UT208)
● Zeroing function
● Full icon display (UT207/UT208/UT209)
● MAX/MIN (UT207/UT208/UT209)
● LCD backlight (UT207A/UT208A/UT209A)
● Data hold; Duty cycle (except UT209 )
● Auto power off and low battery indication
● Point contact temperature probe (UT208/UT208A)
● Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
-
Digital Multi Meter
DIGITAL MULTIMETER MODEL 1009
• Display : 4000 counts.
• Auto range and manual range selector provided.
(with range hold feature)
• Resistance range provides audible continuity test.
• Automatically turns power off in about 30 minutes to conserve battery life.
• Direct current measurement up to 10A AC and DC.
• With Holster.SKU: n/a -
Moisture Testers
MS6900S Moisture Tester
Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
SKU: n/a
Related products
-
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Clamp Meters
UT256B ACA DCA Fork Clamp Meters
UT256 series is an AC/DC fork meter with high reliability, high security, auto-range, and mini shape. Its appearance adopts creative design so that wires to be tested can be stuck by the jaw directly instead of after the jaw is pressed to open. It can measure AC/DC current provided with true RMS function. Flashlight on the meter is specially designed for smooth measurement under darkness. Full-range overload protection and distinctive appearance design make it be a new-generation practical electrical measuring meter with better performance.
SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a
There are no reviews yet.