UTP1300 series power supply is an economical switch-type DC regulated power supply with single output. It has a pure output, excellent performance indicators, and can meet diverse testing needs. Used in product debugging and maintenance, quality control and testing, production automation testing, teaching experiments, etc.
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications | ||
Model | UTP1310 | |
Output voltage | 0~32V | |
Output current | 0~10A | |
Output power | 320W | |
Load regulation | CV<0.1%+5mV CC<0.2%+3mA |
|
Power regulation | CV<0.01%+5mV CC<0.2%+3mA |
|
Output regulate resolution | CV: 10mV (typical), CC: 1mA (typical) | |
MTBF(e): | ≥2000hrs | |
Programming accuracy (25℃±5℃) |
Voltage | <0.1%+1digit |
Current | <0.2%+3mA | |
Ripple and noise (20Hz~20MHz) |
Voltage | ≤10mVrms |
Current | ≤5mArms | |
Display mode | LED voltage and current dual display | |
General Characteristics | ||
Power | Input voltage: 110V AC/220V AC, 50Hz~60Hz | |
Display | EBTN LCD | |
Product color | White and grey | |
Product size (W×H×D) | 80mm x 150mm x 230mm | |
Product net weight | 2.5kg |
₨33,000 ₨33,340
Weight | 2.5 kg |
---|---|
Dimensions | 8 × 15 × 23 cm |
Based on 0 reviews
Be the first to review “UTP1310 Switching DC Power Supply”
-
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Multimeters
UT 161D Digital Multimeter
Specifications Range UT161D Certifications (UT161 Series only) CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%+3) DC voltage (V) 1000V ±(0.5%+3) AC current (A) 10A 20A ±(1.2%+5) DC current (A) 10A 20A ±(1%+2) Resistance (Ω) 60MΩ ±(1%+2) 220MΩ Capacitance (F) 60mF ±(3%+5) 220mF Frequency (Hz) 10MHz ±(0.1%+4) 220MHz Duty cycle (%) 0.1%~99.9% ±(2%+5) Temperature (℃/℉) -40℃~1000℃ ±(1%+3) -40℉~1832℉ ±(1%+6) Display count 6000 Bandwidth (Hz) 40Hz~1kHz LPF ACV LoZ ACV √ ACV+DCV Transistor hFE Peak Hold √ Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, temperature probe, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 325mm Standard carton gross weight 17.8kg Optional accessories Bluetooth/APP SKU: n/a -
Rework & Soldering Station
YH 950 HIGH FREQUENCY SOLDERING STATION
MODEL 950 RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 150W WORKING ENVIRONMENT 0~40℃ relative humidity<80% STORAGE ENVIRONMENT -20~80℃ relative humidity<80% BODY SIZE 20*12.6*9.8CM WEIGHT 4.6KG WORK VOLTAGE AC 26V±10% 50Hz TEMPERATURE RANGE Three-optional temperature control, respectively:①200-480℃,②100-450℃,③50-420℃ TEMPERATURE STABILITY ±1℃ (Static) DISPLAY TYPE LCD display PID TEMPERATURE CORRECTION CYCLE rapidly 20ms TIP OF GROUND VOLTAGE <2Ω TIP GROUND IMPEDANCE <2mV SKU: n/a
There are no reviews yet.