- 1.Industrial electricity
- 2.Residential electricity
- 3.Air conditioning
- 4.Automobile
Clamp Meters
Digital Clamp Meter UT202+ UNI-T
Availability:
4 in stock
Specifications | Range | UT202+ |
AC current (A) | 400A | ±(2%+10) |
600A | ||
AC current frequency (Hz) | 50Hz~100Hz | ±(1%+5) |
AC voltage (V) | 600V | ±(0.8%+5) |
AC voltage frequency(Hz) | 10Hz~10kHz | ±(1%+5) |
10Hz~60kHz | ||
Resistance (Ω) | 40MΩ | ±(0.8%+2) |
60MΩ | ||
Capacitance (F) | 4mF | ±(4%+5) |
40mF | ||
60mF | ||
Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
Frequency (Hz) | 10Hz~10MHz | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Jaw opening | 28mm | |
True RMS | √ | |
NCV | √ | |
Live wire test | ||
Continuity test | √ | |
Diode | √ | |
MAX/MIN | √ | |
Relative mode | √ | |
Zero mode | ||
Data hold | √ | |
Low battery indication | √ | |
Auto power off | √ | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 37mm x 25mm | |
Product color | Red and grey | |
Product net weight | 248g | |
Product size | 215mm x 63mm x 36mm | |
Standard accessories | Batteries, test leads, Themocouple | |
Standard individual packing | Gift box, Carring bag, English manual | |
Standard quantity per carton | 40pcs | |
Standard carton measurement | 485mm x 295mm x 385mm | |
Standard carton gross weight | 17.8kg |
₨5,820 ₨5,945
4 in stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 21 × 6 × 4 cm |
Based on 0 reviews
Be the first to review “Digital Clamp Meter UT202+ UNI-T”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a -
Laser Distance Meters
LM200C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a
There are no reviews yet.