-19%

DM 4070 LCR METER


7,100 8,720

Compare

DM4070 Digital LCR Meter 3 1/2 20H 2000uF 20Mohm self discharge resistance inductance capacitance meter tester

General characteristics

Display: LCD Max. display: 1999

Inductance measurement: 0.1uH~20H

Capacitance measurement: 0.1pF~2000uF

Resistance measurement: 0.01Ω~20MΩ

Zero adjustment: To obtain accurate measuring values, perform zero adjustment before measuring capacitance under 20nF

Over range: display “1”

Low battery indicator: “” symbol appears

Sampling rate: 0-5 seconds

Working temperature: 0~40°

Relative humidity: less than 80%

Meter size: 185mm×93mm×35mm (length × width × height)

Weight: Approx.290g(including 9V battery)

Power source: one 9V battery (6F22 or equivalent)

Battery life: alkaline battery lasts 150 hours

Standard accessories: test leads, operation manual

Special Function VC6013/VC6243+/DM4070
Automatic discharge Yes
Data Hold Yes
Auto power off Auto off After 30s when didn’t measuring
Backlight Delay about 10s
Function protection Yes
Shockproof protection Yes
Operation way Manual range
Sampling rate 3 times/s
Max Display 1999
LCD size 65*41mm
Battery 9V(6F22) Not include Battery

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DM 4070 LCR METER”

There are no reviews yet.

  • UTG9002C-II Function/Arbitrary Waveform Generator

    0 out of 5
    (0)

    1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary

    2. Output frequency range: Sine/square, 2MHz
    3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
    4. EBTN LCD screen
    SKU: n/a
  • JM 8171 TOOL KIT

    0 out of 5
    (0)

    Minimum Order Quantity: 40

    JM 8171 mini electric screwdriver set can be used to repair and disassemble precision digital products and household products. Mini electric screwdriver set has its new and unique research and developed design, which creates the apex of technology.

    SKU: n/a
  • TITAN Clamp Multimeter TN88A in Pakistan

    0 out of 5
    (0)

    Specifications:

    • TITAN TN88A Digital Clamp Meter 500V Insulation Tester
    • DC voltage: 1000V ± (0.8% + 2)
    • AC voltage: 750V ± (1.2% + 4)
    • Alternating current: 200A / 1000A ± (2.5% + 5)
    • Resistance: 200Ω / 20kΩ ± (1.0% + 2)
    • Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
    • High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
    • The continuity of the alarm
    • Low screen voltage
    • Data retention
    • Input impedance: 10MΩ
    • Sampling rate: 3 times / s
    • Maximum display: 1999
    • Jaw opening: 50mm
    SKU: n/a
  • UT278A Clamp Earth Ground Testers

    0 out of 5
    (0)

    UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
    .

    SKU: n/a
  • UT39A+ Digital Multimeter

    0 out of 5
    (0)

    1. 1000V DC voltage measurement

    2. 750V AC voltage measurement
    3. 10A DC/AC current measurement
    4. Resistance/Capacitance
    5. hFE
    6. Diode/Continuity test
    SKU: n/a
  • UNI T Benchtop Digital Multimeter UT8802E

    0 out of 5
    (0)
    1. 20,000 Count EBTN LCD Display
    2. DC Voltage: 200mV/2V/20V/200V/1000V
    3. AC Voltage: 2V/20V/200V/750V
    4. DC Current: 200μA/2mA/20mA/200mA/20A
    5. AC Current: 2mA/20mA/200mA/20A
    6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
    7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
    8. Frequency: 200Hz~10MHz
    9. Duty cycle: 5%~99%
    10. Frequency response: 1 kHz
    11. USB Interface
    12. Data hold
    13. MAX/MIN
    14. Continuity buzzer
    15. Diode/transistor
    16. test
    17. CAT II 600V
    SKU: n/a