Digital Storage Oscilloscope UTD2202CM
5 in stock
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
₨0
5 in stock
CompareSpecifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
| Weight | 2.5 kg |
|---|---|
| Dimensions | 32 × 15 × 13 cm |
| Model | UTD2202CM | |
| Channels | 2 | |
| Bandwidth | 200MHz | |
| Sample Rate | 1GS/s | |
| Rise Time | ≤1.8ns | |
| Memory Depth | 16Mpts | |
| Waveform Acquisition Rate | ≥150,000wfms/s | |
| Vertical Sensitivity(V/div) | 2mV/div~5V/div | |
| Time-based Range(s/div) | 2ns/div~50s/div | |
| Storage | Setup, Wave, Bitmap, CSV | |
| Trigger | ||
| Trigger Frequency | 6 bits | |
| Trigger Modes | Edge, Pluse, Video, Slope, Alternate | |
| Trigger Level Range | Internal | Center of the Screen±div |
| EXT | ±1.2V | |
| EXT/5 | ±6V | |
| Suppression Range | 100ns~1.5s | |
| Edge Trigger | ||
| Edge Mode | Rising, Falling, Rising and Falling | |
| Pluse Trigger | ||
| Trigger Mode | Positive pulse width(greater than, less than or equal to); Negative pulse width(greater than, less than or equal to) | |
| Pluse Width Range | 20ns~10s | |
| Video Trigger | ||
| Signal Mode and Line/Field | Supports standard NTSC, PAL and SECAM signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM) | |
| Slope Trigger | ||
| Trigger Mode | Positive slope(greater than, less than or equal to); Negative slope(greater than, less than or equal to) | |
| Time Setting | 20ns~10s | |
| Measurements | ||
| Cursor | Manual Mode | Voltage difference between the cursor（ΔV)，Time difference between cursor（ΔT)，reciprocal of ΔT(Hz) (1/ΔT) |
| Tracking Mode | Voltage value and time value of wave point | |
| Auto Measurements | Allowed to display cursor in auto measurement | |
| Auto Measurements | Maximum, Minimum, Peak to Peak Value, Top Value, Amplitude, Period Average, Average, Period Mean Square Root, Mean Square Root, Acreage, Period Acreage, Overshoot, Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time, Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF | |
| Mathematics Operations | Add, Subtract, ,Multiply, Divide and Reverse Phase | |
| Storage Waveform | 10 Groups of Waveforms, 10 Kinds of Settings | |
| FFT | Window | Hanning、Hamming、Blackman、Rectangular |
| Sample Point | 1024 points | |
| Lissajous Figures | Bandwidth | 60MHz/100MHz |
| Phase Difference | ±3 degrees | |
| Others | ||
| Interface | Standard Accessories: USB Host, USB Device, Pass/Fail; Optional: LAN, LA | |
| General Characteristics | ||
| Power | 100～240VACrms，50Hz/60Hz | |
| LCD Size | 7 inches TFT LCD ,WVGA(800×480) | |
| Product Color | Ivory and Grey | |
| Product Net Weight | 2.9 kg | |
| Product Size (W×H×D) | 332mm×147mm×170mm | |
| Standard Accessories | Probes×2(1:1,10:1 switchable), Power Cord, USB Cable, PC Software CD | |
| Standard Individual Packing | Gift Box | |
Brand
UNI T
Based on 0 reviews
Be the first to review “Digital Storage Oscilloscope UTD2202CM”
-
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
-
Battery Testers
UT673A Battery Testers
Features of UT673A Battery Testers
Certifications: CE, UKCA, FCC
● 12V cranking lead acid battery test
● 12/24V charging or cranking system test● Display battery capacity, voltage, resistance and life● Four-termina Kelvin test● 10 types of battery standards● Language option (Chinese/English)● Test without battery disassembly● LED color indication for test result (UT673A)● Print on-line and real-time test reports (UT675A)● USB data transfer (UT675A)SKU: n/a -
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a -
Clamp Meters
AC DIGITAL CLAMP METER KEW 2117R
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Insulation Tester
Insulation Resistance Testers UT513A
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
SKU: n/a
Related products
-
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a -
Oscilloscopes
UTD2072CEX-II Digital Storage Oscilloscope
1. 2 channels
2. 70MHz/100MHz bandwidth; 1GSa/s real-time sampling rate3. Up to 28Mpts memory depth4. Calibration signal output: 10Hz, 100Hz, 1kHz (by default),10kHz or 100kHz5. Max 10Mpts waveform record6. 8-inch TFT LCD, WVGA (800X480)SKU: n/a -
Oscilloscopes
UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope
Analog bandwidth 150MHz 250MHz Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels) Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) Memory depth 70Mpts Waveform capture rate 200,000wfms/s Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display ) Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall] Input impedance (1MΩ±1%) II (20pF±3pF) Input impedance digital (101kΩ±1%) II (9pF±1pF) Vertical scale 1mV/div~20 V/div (1 MΩ) DC gain accuracy <5mV: ±3%, ≥5mV: ±2% Waveform record 100,000 frames Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRayBus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations Auto measurements
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→AMeasurement display 5 types Measurement statistics Average, Max, Min, standard deviation and number of measurements Frequency counter 6 bits Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA Standard Accessories
USB interface cable UT-D14 Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06 Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05 16CH Logic analyzer probe UT-15M SKU: n/a
There are no reviews yet.