Digital Storage Oscilloscope UTD2202CM
5 in stock
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
₨0
5 in stock
CompareSpecifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
| Weight | 2.5 kg |
|---|---|
| Dimensions | 32 × 15 × 13 cm |
| Model | UTD2202CM | |
| Channels | 2 | |
| Bandwidth | 200MHz | |
| Sample Rate | 1GS/s | |
| Rise Time | ≤1.8ns | |
| Memory Depth | 16Mpts | |
| Waveform Acquisition Rate | ≥150,000wfms/s | |
| Vertical Sensitivity(V/div) | 2mV/div~5V/div | |
| Time-based Range(s/div) | 2ns/div~50s/div | |
| Storage | Setup, Wave, Bitmap, CSV | |
| Trigger | ||
| Trigger Frequency | 6 bits | |
| Trigger Modes | Edge, Pluse, Video, Slope, Alternate | |
| Trigger Level Range | Internal | Center of the Screen±div |
| EXT | ±1.2V | |
| EXT/5 | ±6V | |
| Suppression Range | 100ns~1.5s | |
| Edge Trigger | ||
| Edge Mode | Rising, Falling, Rising and Falling | |
| Pluse Trigger | ||
| Trigger Mode | Positive pulse width(greater than, less than or equal to); Negative pulse width(greater than, less than or equal to) | |
| Pluse Width Range | 20ns~10s | |
| Video Trigger | ||
| Signal Mode and Line/Field | Supports standard NTSC, PAL and SECAM signal mode, lines range is 1-525(NTSC) and 1-625(PAL/SECAM) | |
| Slope Trigger | ||
| Trigger Mode | Positive slope(greater than, less than or equal to); Negative slope(greater than, less than or equal to) | |
| Time Setting | 20ns~10s | |
| Measurements | ||
| Cursor | Manual Mode | Voltage difference between the cursor（ΔV)，Time difference between cursor（ΔT)，reciprocal of ΔT(Hz) (1/ΔT) |
| Tracking Mode | Voltage value and time value of wave point | |
| Auto Measurements | Allowed to display cursor in auto measurement | |
| Auto Measurements | Maximum, Minimum, Peak to Peak Value, Top Value, Amplitude, Period Average, Average, Period Mean Square Root, Mean Square Root, Acreage, Period Acreage, Overshoot, Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time, Falling Time, Pluse Width, Positive Pluse Width, Negative Pluse Width, Burst Pluse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR、FRF、FFR、FFF、LRR、LRF、LFR、LFF | |
| Mathematics Operations | Add, Subtract, ,Multiply, Divide and Reverse Phase | |
| Storage Waveform | 10 Groups of Waveforms, 10 Kinds of Settings | |
| FFT | Window | Hanning、Hamming、Blackman、Rectangular |
| Sample Point | 1024 points | |
| Lissajous Figures | Bandwidth | 60MHz/100MHz |
| Phase Difference | ±3 degrees | |
| Others | ||
| Interface | Standard Accessories: USB Host, USB Device, Pass/Fail; Optional: LAN, LA | |
| General Characteristics | ||
| Power | 100～240VACrms，50Hz/60Hz | |
| LCD Size | 7 inches TFT LCD ,WVGA(800×480) | |
| Product Color | Ivory and Grey | |
| Product Net Weight | 2.9 kg | |
| Product Size (W×H×D) | 332mm×147mm×170mm | |
| Standard Accessories | Probes×2(1:1,10:1 switchable), Power Cord, USB Cable, PC Software CD | |
| Standard Individual Packing | Gift Box | |
Brand
UNI T
Based on 0 reviews
Be the first to review “Digital Storage Oscilloscope UTD2202CM”
-
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a -
Tool Kits
JM-8126 58 in 1 Multitool Interchangeable Magnetic Screwdriver Set
Features:Brand new 58-in-1 interchangeable precise manual tool set. High hardness and good toughness.Professional portable hardware tools with perfect weight & compact design for easy carry.Non-slip tough shaft ensures greater comfort and convenience.Available for repairing laptops, mobile devices, and other precision items like wristwatches.SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
Related products
-
Oscilloscopes
UTD1025CL Handheld Digital Storage Oscilloscopes
Product Features:
1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
4、 Isolated USB for much safer communication;
5、 White and black display for your option, perfect for use outdoors with strong light;
6、 Intelligent local or network software update；
7、 More than 8hours of continuous battery operation.SKU: 80000 -
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.SKU: n/a -
Oscilloscopes
UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope
- 100MHz bandwidth
- number of channels 2
- sampling 1GS / s
- max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
- waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
- time base range 5ns/div – 50s/div
- input coupling (1MΩ ± 2%) // (20pF ± 3pF)
- verical axis 1mV/div – 20V/div (1MΩ)
- DC gain accuracy ± 3%
- number of saved waveforms 65000
- trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
- mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
- automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements : 5 simultaneous measurements
- statistics : Mean, Max, Min, standard deviation, number of measurements
- frequency counter : 6 bits
- standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)
SKU: n/a -
Oscilloscopes
UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope
Analog bandwidth 150MHz 250MHz Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels) Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) Memory depth 70Mpts Waveform capture rate 200,000wfms/s Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display ) Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall] Input impedance (1MΩ±1%) II (20pF±3pF) Input impedance digital (101kΩ±1%) II (9pF±1pF) Vertical scale 1mV/div~20 V/div (1 MΩ) DC gain accuracy <5mV: ±3%, ≥5mV: ±2% Waveform record 100,000 frames Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRayBus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations Auto measurements
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→AMeasurement display 5 types Measurement statistics Average, Max, Min, standard deviation and number of measurements Frequency counter 6 bits Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA Standard Accessories
USB interface cable UT-D14 Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06 Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05 16CH Logic analyzer probe UT-15M SKU: n/a
There are no reviews yet.