UT523A Earth Resistance Soil Resistivity Tester
3 in stock
UT523A Earth Resistance Soil Resistivity Tester
₨98,100 ₨111,875
3 in stock
CompareUT523A Earth Resistance Soil Resistivity Tester
| Weight | 1.5 kg |
|---|---|
| Dimensions | 21 × 19 × 9 cm |
| Basic Functions | Range | Best Accuracy |
| Model | UT523A | |
| Earth resistance | 0.00Ω～19.99Ω | ±(2%+5) |
| 20.0Ω～199.9Ω | ±(2%+5) | |
| 200Ω～1999Ω | ±(2%+5) | |
| 2.00kΩ～19.99kΩ | ±(2%+5) | |
| 20.0kΩ～210.0kΩ | ±(2%+5) | |
| Soil resistivity | 0.00Ωm～99.99Ωm | Decided by measuring precision of R: (ρ=2πaR a:1 m～100m, π=3.141) |
| 100.0Ωm～999.9Ωm | ||
| 1000Ωm～9999Ωm | ||
| 10.00kΩm～99.99kΩm | ||
| 100.0kΩm～999.9kΩm | ||
| 1000kΩm～9000kΩm | ||
| Earth voltage | AC 0.00～750V | ±(2%+5) |
| Testing resistance | 128Hz/111Hz/105Hz/94Hz(AFC) | √ |
| Features | ||
| Measuring method | Earth resistance: rated current pole changing method with Max 20mA measuring current; soil resistivity: quadrupole method (Wen-Na method ); earth voltage: average rectifier (between P(S) and ES interfaces) |
√ |
| Short-circuit testing current | AC 30mA max | √ |
| Open-circuit testing voltage | AC 40V max | √ |
| Auto range | √ | |
| Distance between electrodes | 1m～200m can be set. | √ |
| Testing voltage waveform | Sine wave | √ |
| Line voltage | Measure when the voltage is below 750V AC | √ |
| Low battery indicator | ≤7.5V | √ |
| Data hold | √ | |
| Alarm function | √ | |
| RS232 interface | √ | |
| Withstand voltage | AC 3700V/rms(between circuit and case) | √ |
| LCD backlight | √ | |
| Data storage | 300 groups | √ |
| Auxiliary earth resistance test | 0.00KΩ～30kΩ(100R+rC<50kΩ, 100R+rP<50kΩ) | √ |
| Overload protection | Earth resistance measurement: input 280V AC between C(H) and E, P(S) and ES for 3s | √ |
| Interference test | Auto identify interference signals, when interference voltage is higher than 5V, the symbole NOISE is displayed. | √ |
| Measuring time(s) | More than 5000 times (perform short circuit test once, and again after 30s) | √ |
| Insulation resistance | Above 20MΩ (500V between circuit and case) | √ |
| General Characteristics | ||
| Power supply | DC 9V (6 Zinc-manganese dry batteries, R14S 1.5V; can continuously standby for 300hrs) | |
| LCD size | 128mm×75mm | |
| Product color | Red and grey | |
| Product weight | 1443g (including batteries) | |
| Product size | 215mm×190mm×95mm | |
| Standard accessories | Standard test lead, simple test lead, batteries, PC software CD, RS232 interface cable | |
| Standard Individual Packing | Tool box, gift box, English manual, warranty card | |
| Standard Quantity Per Carton | 4pcs | |
| Standard Carton Measurement | 650mm×560mm×300mm | |
| Standard Carton Cross Weight | 30kg (including batteries) | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT523A Earth Resistance Soil Resistivity Tester”
-
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Multimeters
UT81C Scope Digital Multimeter
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitanceSKU: n/a -
Related products
-
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a -
Earth Ground Resistance Testers
MRU-10 Earth Resistance Meter
It allows to:
- measure earthing resistance using auxiliary electrodes,
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
- selection of maximum measuring voltage (25 V and 50 V),
- indication of battery state.
SKU: n/a -
Earth Ground Resistance Testers
UT275 Clamp Earth Ground Testers
UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.
SKU: 90000 -
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
There are no reviews yet.