UT505 series handheld true RMS insulation resistance testers combine features of a digital multimeter and insulation resistance tester. Aside from the typical multimeter functions, these meters can also measure insulation resistance, PI, DAR, and automatically calculate resistance ratio to determine the insulation status.
UT505B Handheld Insulation Resistance Tester
5 in stock
1. Auto power off
₨64,800 ₨68,310
5 in stock
CompareWeight | 0.6 kg |
---|---|
Dimensions | 10 × 22 × 6 cm |
Specifications | Range | UT505B | |
Insulation resistance (Ω) | 50V | 50V/100V/250V/500V/1000V | 0%~20% |
0.01MΩ~50MΩ | ±(3%+3) | ||
50MΩ~1GΩ | ±(3%+3) | ||
100V | 1GΩ~10GΩ | ±(10%+3) | |
0.01MΩ~100MΩ | ±(3%+3) | ||
100MΩ~1GΩ | ±(3%+3) | ||
250V | 1GΩ~20GΩ | ±(10%+3) | |
0.01MΩ~200MΩ | ±(1.5%+5) | ||
200MΩ~1GΩ | ±(1.5%+5) | ||
500V | 1GΩ~50GΩ | ±(10%+3) | |
0.01MΩ~500MΩ | ±(1.5%+5) | ||
500MΩ~1GΩ | ±(1.5%+5) | ||
1000V | 1GΩ~100GΩ | ±(10%+3) | |
0.1MΩ~2000MΩ | ±(1.5%+5) | ||
2GΩ~9.9GΩ | ±(5%+3) | ||
10GΩ~20GΩ | ±(7%+3) | ||
20GΩ~200GΩ | ±(20%+3) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
Short circuit current | <2mA | ||
Leakage current (A) | 10~2000μA | ±(10%+3) | |
Low resistance (Ω) | 0.01Ω~100Ω (about 5V/>200mA/20mA optional) | ±(1.5%+3) | |
General resistance (Ω) | 0.01kΩ~10MΩ | ±(3%+3) | |
DC voltage (V) | 0V~600V | ±(2%+3) | |
AC voltage (V) | 0V~600V | ±(1.5%+5) | |
Frequency (Hz) | 45~1kHz | ±(0.1%+3) | |
Capacitance (F) | 100pF~500μF | ±(5%+5) | |
Features | |||
Display count | 6000 | ||
Auto range/True RMS | √ | ||
Step voltage | 10% steps at 50%~120% of range | √ | |
DAR | 60s/15s and 60s/30s | √ | |
PI/Timing measurement | √ | ||
Auto discharge | √ | ||
Auto fuse check | √ | ||
Analog bar graph | √ | ||
Continuity buzzer | √ | ||
Comparison measurement | √ | ||
Low battery indication | √ | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 78mm x 59mm | ||
Product color | Red and grey | ||
Product net weight | 630g | ||
Product size | 103mm x 225mm x 59mm | ||
Standard accessories | Batteries, test leads, test probes, alligator clips | ||
Standard individual packing | Carrying bag, gift box, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 515mm x 380mm x 385mm (0.075 CBM per standard carton) | ||
Standard carton gross weight | 20.8kg | ||
Optional accessory | Remote test lead |
Based on 0 reviews
Be the first to review “UT505B Handheld Insulation Resistance Tester”
-
Function Generators
UTG9005C-II Function/Arbitrary Waveform Generato
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
2. Output frequency range: Sine/square, 5MHz3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz4. 4W power output5. EBTN LCD screenSKU: n/a -
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
Multimeters
UT132A Plam Size Digital Multimeters
UT132 Series is a 3.5 digit palm sized digital multimeter with stable performance, and fashionable design. UT132 are safe and reliable manual ranged multimeters that can be used for measuring AC/DC voltage, resistance, capacitance, temperature, diode voltage drop, transistor hFE parameter, circuit continuity, square wave output and so on. Its adapter plug socket can conveniently test surface mount devices. UT132 can be used for home, schools, factories, electrical and chemical engineering, and other areas. It is a great tool for circuit maintenance and electrical equipment repair.
SKU: n/a
There are no reviews yet.