UT300A+ Infrared Thermometer
Out of stock
1. Simple one button operation
₨3,270 ₨4,510
Out of stock
CompareWeight | 0.2 kg |
---|---|
Dimensions | 13 × 9 × 4 cm |
Specifications | UT300A+ |
Temperature range | -20℃~400℃ |
-4℉~752℉ | |
Accuracy | >0℃: ±2.0℃ or ±2%; ≤0℃: ±(2.0℃+0.1℃/℃) |
>32℉: ±4.0℉ or ±2%; ≤32℉: ±(4.0℉+0.1℉/℉) | |
Repeatability | 1℃ or 1.0% (2℉ or 1.0%) |
D:S ratio | 10:1 |
Response time | ≤500ms (95% of reading) |
Emissivity | 0.95 |
Spectral response | 5.5um~14um |
Laser power | < 1mW |
Features | |
Auto power off | 8s |
Low battery indication | √ |
Data hold | √ |
℃/℉ selection | √ |
Backlight | √ |
Laser | √ |
Operating temperature | 0℃~50℃ (32℉~122℉) |
Storage temperature | -20℃~60℃ (-4℉~140℉) |
Operating humidity | <90% RH (non-condensing) |
Drop test | 1m |
General Characterisitics | |
Power | 1.5V battery (LR03) x 2 |
Display | 20mm x 24mm |
Product color | Red and grey |
Product net weight | 146g |
Product size | 135mm x 94mm x 36.5mm |
Standard individual packing | Blister, English manual |
Standard quantity per carton | 20pcs |
Standard carton measurement | 430mm x 265mm x 300mm |
Standard carton gross weight | 6.97kg |
Based on 0 reviews
Be the first to review “UT300A+ Infrared Thermometer”
-
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Oscilloscopes
UTD2052CL Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.SKU: n/a -
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a -
Function Generators
UTG9005C-II Function/Arbitrary Waveform Generato
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
2. Output frequency range: Sine/square, 5MHz3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz4. 4W power output5. EBTN LCD screenSKU: n/a
There are no reviews yet.