JAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
10 in stock
Application:
Cell phone/Tablet/Camera/Laptop/Glasses
₨8,633 ₨11,990
10 in stock
CompareJAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
Weight | 0.5 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
800mAH Battery capacity
Matching with micro USB wiring and plugs
Input voltage supports 220V AC/5v USB voltage
FCC CE and other certificates are completed
Guaranteed Safety and portability
No-load speed can up to 395r/min
Take the demolition of the iphone bottom five-star 0.8 screws as an example*
You can remove a screw in an average of 2 seconds
Greatly improve the efficiency of electric screwdriver use
(*Derived from experimental data)
Technical data
Basic function |
Range |
Accuracy |
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+5) |
ACV |
400mV/4V/40V/400V/750V |
±(1.0%+5) |
DCA |
400A/1000A |
±(2.0%+5) |
ACA |
400A/1000A |
±(2.0%+5) |
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+3) |
Capacitance |
4nF/40nF/400nF/4uF/40uF/200uF |
±(3.5%+8) |
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
±(0.5%+4) |
Temperature |
(-40~ 1000) ℃ / (-40 ~1832) ℉ |
±(1.0%+5) |
Special function |
CM-2056 |
NCV test |
√ |
True RMS test |
√ |
Diode test |
√ |
Continuity test |
Less than 50Ω±10Ω |
Low battery indicator |
Approx. less than 2.4 V |
Data hold |
√ |
Auto power off |
About 15 minutes |
Function protection |
√ |
Clamp light |
√ |
Backlight display |
√ |
Input impedance |
10MΩ |
Sampling rate |
3 times/s |
AC frequency response |
Current 50-60Hz/ voltage 50-400Hz |
Operation method |
Auto or manual range |
Max display |
4000 |
Clamp opens |
52mm |
Battery |
3V (2*AAA battery) |
General Characteristic
Meter color |
Orange and Black |
Meter weight |
About 280g (including battery) |
Meter size |
270×123×50mm |
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
There are no reviews yet.