-5%

LKZ-720 Wires and pipe locator

Availability:

2 in stock
Add to Wishlist
Compare

Features:

  • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
  • phase detection mode,
  • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
  • a LED bright torch,
  • headphone socket in receiver,
  • screens backlight for work in dark,
  • transmission battery status and settings of the transmitter to the receiver
  • operation in wide range of rated voltage, up to 500V RMS,
  •  measurement of voltage at the object to 500 Vrms,
  • three levels of transmitter amplification,
  • automatic or manual selection of transmitter operation modes,
  • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
  • software upgrade via USB,
  • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.

₨200,000 ₨210,000

2 in stock

Compare
  • Detection of wires and cables (live or not)
    • detection of cables in ceilings, walls and floors,
    • detection of breaks in cables,
    • tracing cables in building installation,
    • locating power points and switches in buildings,
    • locating short circuits between leads,
    • tracing shielded cables,
    • tracing cables in metal ducts.
  • Identification of fuses on the distribution board.
  • Tracing underground cables.
  • Tracing conductive water and heating pipelines.
  • Non-contact detection of live cables.
Category:

Electric security:

  • type of insulation: double, according to EN 61010-1
  • measurement category: CAT III 600V acc. to EN 61010-1
  • transmitter’s protection class acc. to EN 60529: IP67
  • receiver’s protection class acc. to EN 60529: IP40

Other technical data:

  • transmitter’s power supply: four AA alkaline battery or NiMH rechargeable battery
  • transmitter’s max working voltage: 500 Vrms (707 Vampl)
  • detector’s max range („I” mode) 2m
  • non-contact neon max range: 20 cm (in air), 3 cm (in concrete)
  • receiver’s power supply: battery 9V 6LR61 alkaline

Rated operational conditions:

  • operating temperature -10°C…+50°C

Brand

SONEL

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LKZ-720 Wires and pipe locator”

There are no reviews yet.

  • ,

    JM-8101 Precision Screwdriver Tool Kit

    ,

    JM-8101 Precision Screwdriver Tool Kit

    0 out of 5
    (0)

     

    Features:

    • Adjustable screwdriver bits for different screws.
    • Finest CR-V bits with HRC up to 52 ℃.
    • Common used in precision work in electronics, DIY models, jewelry, eye glasses and other home appliances.
    • Curved tip tweezer common used in mini electronic components.
    • Portable box with transparent cover.
    SKU: n/a
    ₨1,020 ₨1,285
    Add to cart
    Add to Wishlist
    Compare

  • JM 999 SCREW DRIVER SET

    JM 999 SCREW DRIVER SET

    0 out of 5
    (0)
    SKU: n/a
    ₨420 ₨530
    Add to cart
    Add to Wishlist
    Compare

  • UT682D Wire Tracker

    UT682D Wire Tracker

    0 out of 5
    (0)

    UT682 wire tracker consists of a transmitter and a receiver, it is able to track ethernet/telephone/power cables without opening their insulation.

    UT682 can troubleshoot ethernet cables and is a recommended tool for debugging communication cables and audio/video cables.
    SKU: n/a
    ₨4,933
    Add to cart
    Add to Wishlist
    Compare

  • HTC-1 HYGROMETER

    HTC-1 HYGROMETER

    HTC-1 HYGROMETER

    China Brand
    0 out of 5
    (0)
    SKU: n/a
    ₨641 ₨763
    Add to cart
    Add to Wishlist
    Compare

  • UT50C Modern Digital Multimeters

    UT50C Modern Digital Multimeters

    (2)

    UT 50-II SERIES  digital multimeter  UT-50C with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

    SKU: n/a
    ₨3,300 ₨3,643
    Add to cart
    Add to Wishlist
    Compare

  • YH 8786D HEAT GUN SOLDERING IRON WELDING STATION

    YH 8786D HEAT GUN SOLDERING IRON WELDING STATION

    0 out of 5
    (0)

    Product Details

    • [ 2 in 1 Dual System with Advanced Designs ]-This station combines soldering station and hot air work station for versatile uses.Both the soldering and hot air station have teacher stabilization function to keep iron and hot air gun at the set nature steadily.
    • [Intelligent Temperature Control and Advanced Functions & Safety Features ] -With the high-end precision PID program,the station can monitor and correct the actual temperatures at high speed with fast nature composition to provide the accuracy that you need .Exclusive in-holder standby function to help cool the hot air gun when it’s idle,preserving hot air gun in good condition.Equipped with premium Hot Air Gun Fail-safe function to make your work safer and prevent the risk of fire hazards.
    • [Digital Display and Anti-static design]-Digital display can show the accurate nature in real time, which makes your selling work easy.Special anti-static grounding design,whatich can prevent companions from being damaged by static electricity.
    • [Proprietary Hot Air Technologies and Soldering Performance ]Our exclusive cylindrical hot air heating element heats up quickly. Hot Air template is adjustable from 100-480 ℃/212-896 °F,simulated air volume adjustable from 20 ~ 80.75W Soldering Performance ,the template adjustable from 20/392-896 °F with PID template stabilization powered by dual-core microprocessor.
    SKU: n/a
    ₨12,240 ₨14,080
    Add to cart
    Add to Wishlist
    Compare

Related products

  • UT18D Voltage and Continuity Tester

    UT18D Voltage and Continuity Tester

    0 out of 5
    (0)

    1. Auto power off, the conductor to be measured is greater than 12V

    2. Phase rotation test
    3. Continuity test with buzzer and LED indication
    4. Low battery indication and over voltage prompt
    5. Flashlight
    6. Test live voltage without batteries
    7. Buzzer and silent modes available
    8. Auto range
    9. Polarity indication
    SKU: n/a
    ₨12,000 ₨13,000
    Add to cart
    Add to Wishlist
    Compare

  • MS6812 Cable Tracker

    MS6812 Cable Tracker

    0 out of 5
    (0)

    The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

    ● Sound and Light Instruction
    ● Cont and Tone LED Light

    Applications
    – Judge Continuity of the Cables or Wires
    – Track the Cables or Wires, and Diagnose the Break Point
    – Receive the Tone Signal on the Cables or Wires(Telephone Line)
    – Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
    – Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

    SKU: n/a
    ₨2,631 ₨3,291
    Add to cart
    Add to Wishlist
    Compare

  • UT681L Cable Tester

    UT681L Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
    ₨3,465
    Add to cart
    Add to Wishlist
    Compare

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
    ₨0
    Read more
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447