- Detection of wires and cables (live or not)
- detection of cables in ceilings, walls and floors,
- detection of breaks in cables,
- tracing cables in building installation,
- locating power points and switches in buildings,
- locating short circuits between leads,
- tracing shielded cables,
- tracing cables in metal ducts.
- Identification of fuses on the distribution board.
- Tracing underground cables.
- Tracing conductive water and heating pipelines.
- Non-contact detection of live cables.
LKZ-720 Wires and pipe locator
2 in stock
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
₨200,000 ₨210,000
2 in stock
CompareElectric security:
- type of insulation: double, according to EN 61010-1
- measurement category: CAT III 600V acc. to EN 61010-1
- transmitter’s protection class acc. to EN 60529: IP67
- receiver’s protection class acc. to EN 60529: IP40
Other technical data:
- transmitter’s power supply: four AA alkaline battery or NiMH rechargeable battery
- transmitter’s max working voltage: 500 Vrms (707 Vampl)
- detector’s max range („I” mode) 2m
- non-contact neon max range: 20 cm (in air), 3 cm (in concrete)
- receiver’s power supply: battery 9V 6LR61 alkaline
Rated operational conditions:
- operating temperature -10°C…+50°C
Based on 0 reviews
Be the first to review “LKZ-720 Wires and pipe locator”
-
Clamp Meters
AC/DC DIGITAL CLAMP METER KEW 2056R
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.SKU: n/a -
Power Quality Analyzer
UT285C Three Phase Power Quality Analyzer
1. Waveform real-time display (4 channels voltage/4 channels current).
2. True RMS values of voltages and currents3. Peak current and voltage values4. Total harmonic distortion (THD)5. Active, reactive, apparent power, by phase and cumulative6. Transformer K factor7. Power factors (PF) and displacement factors (DPF or COSΦ)8. Short-term voltage flicker (PST)9. Three phase unbalance(current and voltage)10. USB interface/PC softwareSKU: n/a -
Multimeters
ET 8102 DMM
Specifications:
Model:ET8102
Display:5999 Counts
Color:Black
DC Voltage:6V/60V/600V±(0.5%+3),1000V±(0.8%+10)
AC Voltage:6V/60V/600V±(0.8%+3),750V±(1.2%+10)
DC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
AC Current:600uA/6000uA/60mA/600mA±(1.2%+10),6A/10A±(2.0%+30)
Resistance:600Ω±(0.8%+5),6KΩ/60KΩ/600KΩ/6MΩ±(0.8%+3),40MΩ±(2.5%+3)
Capacitance:60nF/600nF/6μF/60μF/600μF±(3.5%+20),6mF/30mF±(5.0%+3)
Frequency:10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz±(0.1%+3)
Temperature:-20℃~1000℃,±(1.0%+5)<400℃,±(1.5%+15)≥400℃
0℉~1832℉,±(0.75%+5)<750℉,±(1.5%+15)≥750℃
NCV test:Yes
Zero line/fire wire:Yes
Duty cycle:Yes
Diode test:Yes
Continuity testing:Yes
Backlight:Yes
Date hold:Yes
True RMS:Yes
Max/Min value measurement:Yes
Flashlight:Yes
Auto power off:Yes
Low battery indication:Yes
Over range indication:Yes
Power:2 x 1.5V AAA Battery (not included)
Product Size:142 x 68 x 32 mm
Product Net Weight:187gPackage Information:
Package Size:16.5 x 10 x 5cm / 6.5 x 3.9 x 2in
Package Weight:295g / 10.4 ozPackage list:
1 x Digital Multimeter
2 x Test Leads Pens
1 x User Manual
• 1.Multifunction:Can measure AC/DC voltage,AC/DC current,resistance,capacitance,
• 2.Portable design:Small and can be put into pocket,easy to carry.
• 3.Wide range of applications:It’s a perfect tool for the laboratory,factory and home.
• 4.Easy to use & clear to read:With large LCD backlight display and flashlight function,convenient to read data in dark.
• frequency,duty cycle,temperature,NCV,diode,continuity,zero line/fire wire.SKU: n/a
There are no reviews yet.