-37%

LM100D Laser Distance Meter (Curvature Edition)

Availability:

9 in stock


1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling

18,000 28,613

9 in stock

Compare

1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling
Weight 0.4 kg
Dimensions 10 × 6 × 4 cm
Specifications LM100D
Display type EBTN
Display size 2.4 inches
Range 100m
Min. display unit 0.001m
Measurement units m/ft/in
Measurement basis Front/middle/rear
Accuracy ±(2mm+5 x 10-5 D)
Laser class 2
Laser type 630~670nm, ﹤1mW
Features
Single measurement
Continuous measurement
Max/Min/Area
Volume
Pythagoras
Triangle area
Auto leveling horizontal
Auto leveling vertical
Add/Subtract
Curvature measurement
Displacement
Trapezoid
Data storage 20 groups
Auto power off 3 minutes without operation
Auto laser off 30s without operation
Auto backlight off 10s without operation
Electronic leveler
Audio/Voice indication
Battery status display
Line laser marking
Storage temperature  -20℃~70℃
Operating temperature 0℃~40℃

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LM100D Laser Distance Meter (Curvature Edition)”

There are no reviews yet.

  • UPO2102CS Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 2/;
    3、Bandwidth 100MHz,;
    4、Memory Depth 32Mpts(Standard);
    5、Waveform Capture Rate up to 30,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UT21P02CSO
  • MIC-2501,2500V Insulation Resistance Meter

    0 out of 5
    (0)

     

    Electrical safety:

    • type of insulation: double, in acc. with EN 61010-1 und IEC 61557
    • measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
    • case protection rating in acc. with EN 60529: IP65

    Other technical specifications:

    • power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
    • weight of the meter: approx. 0,9 kg
    • dimensions: 200 x 180 x 77 mm
    • display: LCD segment display
    • measurement results memory: 990 cells, 11880 records,
    • transmission of measurement results: USB
    SKU: n/a
  • UNI-T UT622E Handheld LCR Meter

    0 out of 5
    (0)

    Features of UNI-T UT622E Handheld LCR Meter:

    • Up to 0.1% measurement accuracy
    • High-brightness white backlight
    • Ultra-low power consumption and long battery life (8 hours)
    • Maximum test speed: 20 times/s
    • Constant 100Q output impedance
    • Data hold and recording mode
    • Standard Mini-USB interface, SCPI command set
    SKU: n/a
  • UT681C Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • YIHUA 946A-II LCD TOUCH SCREEN GLASS SEPARATING MACHINE

    0 out of 5
    (0)

    1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.

    2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.

    3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.

    4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.

    SKU: n/a
  • UT502A Insulation Resistance Tester

    0 out of 5
    (0)

    1. 2000 count LCD display, overload indication, backlight

    2. AC voltage measurement, auto power off
    3. Auto discharge
    4. Continuous measurements mode, red warning light and buzzer function
    5. Continuous low resistance measurement
    6.  PI and DAR measurement, auto resistivity calculation
    7. Low resistance returning to zero function to improve accuracy
    SKU: n/a