UT123D Subtotal: ₨5,340
-20%
Laser Distance Meters
LM50D Laser Distance Meter (Curvature Edition)
Availability:
10 in stock
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling
₨12,600 ₨15,794
10 in stock
Compare1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling
| Weight | 0.4 kg |
|---|---|
| Dimensions | 10 × 6 × 4 cm |
| Specifications | LM50D |
| Display type | EBTN |
| Display size | 2.4 inches |
| Range | 50m |
| Min. display unit | 0.001m |
| Measurement units | m/ft/in |
| Measurement basis | Front/middle/rear |
| Accuracy | ±(2mm+5 x 10-5 D) |
| Laser class | 2 |
| Laser type | 630~670nm, ﹤1mW |
| Features | |
| Single measurement | √ |
| Continuous measurement | √ |
| Max/Min/Area | √ |
| Volume | √ |
| Pythagoras | √ |
| Triangle area | √ |
| Auto leveling horizontal | √ |
| Auto leveling vertical | √ |
| Add/Subtract | √ |
| Curvature measurement | √ |
| Displacement | √ |
| Trapezoid | √ |
| Data storage | 20 groups |
| Auto power off | 3 minutes without operation |
| Auto laser off | 30s without operation |
| Auto backlight off | 10s without operation |
| Electronic leveler | √ |
| Audio/Voice indication | √ |
| Battery status display | √ |
| Line laser marking | √ |
| Storage temperature | -20℃~70℃ |
| Operating temperature | 0℃~40℃ |
Brand
UNI T
Based on 0 reviews
Be the first to review “LM50D Laser Distance Meter (Curvature Edition)”
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
RPM Meters
UT373 Mini Tachometer
UT373 is a reliable digital non-contact tachometer used to measure rotation speed of motors and other machines. This device is able to display results in RPM or revolution count. This portable device is able to safely measure rotational objects through a non-intrusive method.
SKU: n/a -
Laser Distance Meters
LM120C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a -
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
Related products
-
Laser Distance Meters
LM 120 Laser Distance Meters (Discontinued)
Features of LM Series Laser Distance Meters
Certifications: RoHS
●Ergonomic exterior, comfortable handling
●Millimeter accuracy● Large, multiple angle HD display●Quick, auto calculation with real-time readout●Physical leveler●Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more●Auto power off after 3 minutes without operationSKU: n/a -
Laser Distance Meters
LM100 Laser Distance Meter
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, multiple angle HD display5. Physical and electronics leveler6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more7. Auto power off after 3 minutes without operationSKU: n/a -
Laser Distance Meters
UT396B Professional Laser Distance Meter
UT396 series are professional laser distance meters with color LCD display, electronic multi-axis leveler, real-time camera display on target object, and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
SKU: n/a -
Laser Distance Meters
LM 120A Laser Distance Meters
Features of LM A Series Laser Distance Meters
Certificates: CE, UKCA
● Ergonomic exterior, comfortable handling
● Millimeter accuracy
● 99 groups data storage
● Quick, self calculation with real-time readout
● Physical leveler(Horizontal and vertical)
● Multiple functions: Max/Min/continuous measurement, data storage, etcSKU: n/a
There are no reviews yet.