-20%

LM50D Laser Distance Meter (Curvature Edition)

Availability:

10 in stock


1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling

12,600 15,794

10 in stock

Compare

1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, HD display
4. Auto voice and audio indication
5. Curvature measurement, test curve length via the roller
6. Auto power off after 3 minutes without operation
7. Convenient angle measurement via electronic leveling
Weight 0.4 kg
Dimensions 10 × 6 × 4 cm
Specifications LM50D
Display type EBTN
Display size 2.4 inches
Range 50m
Min. display unit 0.001m
Measurement units m/ft/in
Measurement basis Front/middle/rear
Accuracy ±(2mm+5 x 10-5 D)
Laser class 2
Laser type 630~670nm, ﹤1mW
Features
Single measurement
Continuous measurement
Max/Min/Area
Volume
Pythagoras
Triangle area
Auto leveling horizontal
Auto leveling vertical
Add/Subtract
Curvature measurement
Displacement
Trapezoid
Data storage 20 groups
Auto power off 3 minutes without operation
Auto laser off 30s without operation
Auto backlight off 10s without operation
Electronic leveler
Audio/Voice indication
Battery status display
Line laser marking
Storage temperature  -20℃~70℃
Operating temperature 0℃~40℃

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LM50D Laser Distance Meter (Curvature Edition)”

There are no reviews yet.

  • CMP-400 Digital Clamp-On Multimeter

    0 out of 5
    (0)

    Additionally:

    • safe, insulated measuring clamps,
    • double molded housing,
    • autoranging/manual range selection,
    • DATA HOLD function, for holding measured values,
    • backlit LCD,
    • REL function,
    • over range indication,
    • AUTO-OFF function.
    SKU: n/a
  • UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • LM120C Laser Distance Meters (Discontinued)

    0 out of 5
    (0)

    Features of LM80C/LM120C/LM200C Laser Distance Meters

    ● 2.4-inch color screen

    ● 12 measurement modes
    ● Electronic leveling
    ● 3 selectable measurement references
    ● USB 3.0 supply power
    ● 100 groups of data storage
    ● Rotatable screen
    ● Camera-aided measurement
    ● 2m drop test
    ● IP65 dust and water proof
    SKU: n/a
  • TND 500VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • ,

    UT261B Phase Sequence and Motor Rotation Indicator

    0 out of 5
    (0)

    UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase  rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively.  These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.

    SKU: n/a
  • UT203+ Digital Clamp Meters

    0 out of 5
    (0)

    True RMS

    ● LCD backlight

    ● Large screen and display digits

    ● 60mF large capacitance measurement (UT202A+/UT204+)

    ● Neutral/live wire test (UT202A+/UT204+)

    SKU: n/a