-3%

LM60 Laser Distance Meter

Availability:

10 in stock


1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation

7,056 7,239

10 in stock

Compare

1. Ergonomic exterior, comfortable handling

2. Millimeter accuracy
3. Large, multiple angle HD display
5. Physical and electronics leveler
6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more
7. Auto power off after 3 minutes without operation
Weight 0.4 kg
Dimensions 10 × 7 × 5 cm
Specifications LM60
Display type LCD
Display size 2.0-inches
Range 60m
Min. display unit 0.001m
Measurement units m/ft/in
Measurement basis front/rear
Accuracy ±(2mm+5 x 10-5 D)
Laser class 2
Laser type 630~670nm, ﹤1mW
Features
Single measurement
Continuous measurement
Max/Min/Area
Volume
Pythagoras
Add/Subtract
Auto leveling horizontal
Auto leveling vertical
Data storage 20 groups
Auto power off 3 minutes without operation
Auto laser off 30s without operation
Auto backlight off 10s without operation
Tilt angle ±90.0°
Audio indication
Battery status display
Storage temperature  -20℃~70℃
Operating temperature 0℃~40℃

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “LM60 Laser Distance Meter”

There are no reviews yet.

  • UNI T Benchtop Digital Multimeter UT8802E

    0 out of 5
    (0)
    1. 20,000 Count EBTN LCD Display
    2. DC Voltage: 200mV/2V/20V/200V/1000V
    3. AC Voltage: 2V/20V/200V/750V
    4. DC Current: 200μA/2mA/20mA/200mA/20A
    5. AC Current: 2mA/20mA/200mA/20A
    6. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
    7. Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
    8. Frequency: 200Hz~10MHz
    9. Duty cycle: 5%~99%
    10. Frequency response: 1 kHz
    11. USB Interface
    12. Data hold
    13. MAX/MIN
    14. Continuity buzzer
    15. Diode/transistor
    16. test
    17. CAT II 600V
    SKU: n/a
  • Titan Digital Clamp Meter Multimeter Ampere Meter

    0 out of 5
    (0)

    3 1/2 digits LCD with a Max. Reading of 1999

    2) Diode and Buzzer function

    3) Low battery indication

    4) Overload protection

    5) Data hold for easy reading

    * Specification:

    1) DC voltage: 600V (?1.0%)

    2) AC voltage: 450V ( ?1.2% )

    3) OHM: 200K? (?1.0%)

    4) ACA: 20-400A (?2.0%)

    5) Power supply: (AAA) 1.5V?2

    6) Data hold: YES

    7) Dimension 150L?63W?27.5Hmm

    Weight 121g

    SKU: n/a
  • RF-0.5x

    0 out of 5
    (0)
    SKU: n/a
  • UT50C Modern Digital Multimeters

    (2)

    UT 50-II SERIES  digital multimeter  UT-50C with AC current measuring range of 20 mA/200mA/20A modern design with automatic back light.

    SKU: n/a
  • UT682D Wire Tracker

    0 out of 5
    (0)
    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a