MIC-15k1 ,15kV Insulation Quality Analyzer
1 in stock
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
₨0
1 in stock
CompareMIC-15k1 meter is designed to measure insulation resistance of power objects, i.e.:
- single- and multicore cables,
- transformers,
- motors and generators,
- capacitors, switches and other devices installed in power stations.
It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.
| Weight | 6.3 kg |
|---|---|
| Dimensions | 39 × 31 × 17 cm |
Insulation resistance measurement
Measuring range according to IEC 61557-2
UN = 15 000 V: 50 kΩ…40.0 TΩ
Measurement with DC and increasing voltage (SV) for UISO = 15 kV
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…999 kΩ | 1 kΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 MΩ | 0,01 MΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 MΩ | 0,1 MΩ | ±(3% m.v. + 10 digits) |
| 100…999 MΩ | 1 MΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 GΩ | 0,01 GΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 GΩ | 0,1 GΩ | ±(3% m.v. + 10 digits) |
| 100…999 GΩ | 1 GΩ | ±(3,5% m.v. + 10 digits) |
| 1,00…9,99 TΩ | 0,01 TΩ | ±(7,5% m.v. + 10 digits) |
| 10,0…20,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
| 10,0…40,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
Ranges of measured resistance depending on the test voltage
| Voltage UISO | Measuring range |
|---|---|
| 50 V | 200 GΩ |
| 100 V | 400 GΩ |
| 250 V | 1,00 TΩ |
| 500 V | 2,00 TΩ |
| 1000 V | 4,00 TΩ |
| 2500 V | 10,00 TΩ |
| 5000 V | 20,0 TΩ |
| 10 000 V | 40,0 TΩ |
| 15 000 V | 40,0 TΩ |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…999 nF | 1 nF | ±(5% m.v. + 5 digits) |
| 1,00…49,99 µF | 0,01 µF | ±(5% m.v. + 5 digits) |
- Displaying measured capacity after RISO measurement
- For measurement voltages below 100 V the measurement error is not specified
Technical specification
- type of insulation acc. to: EN 61010-1 and IEC 61557 double
- measurement category acc. to EN 61010-1
- IV 1000 V (operating altitude ≤2000 m)
- IV 600 V (operating altitude ≤3000 m)
- ingress protection acc. to EN 60529: IP67 (IP40 for closed case)
- resistance to external interference voltages: up to 1550 V
- resistance to external interference currents: up to 10 mA
- advanced, digital filtering of interferences: 10 / 30 / 60 / 100 / 200 seconds
- test leads lock: yes
- power supply: Li-Ion 14.8 V rechargeable battery from network 90 V ÷ 260 V, 50 Hz/60 Hz
- dimensions: 390 x 308 x 172 mm
- weight: approx. 6.3 kg
- storage temperature: -25ºC…+70ºC
- operating temperature: -20ºC…+50ºC
- humidity: 20%…90%
- operating altitude: ≤3000 m
- reference temperature: +23ºC ± 2ºC
- reference humidity: 40%…60%
- display: graphical LCD
- number of RISO measurements with battery power supply: min. 1000 acc. to EN 61557-2
- data transmission: USB and Bluetooth
- quality standard: ISO 9001 compliant
- device meets the requirements of standards: EN 61010-1 and IEC 61557
- the product meets EMC requirements (immunity for industrial environment) with accordance to standards: EN 61326-1 and EN 61326-2-2
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-15k1 ,15kV Insulation Quality Analyzer”
-
Function Generators
UNI-T UTG4162A Function/Arbitrary Waveform Generator
bandwidth 160MHz Channels 2 Sampling rate 500MS/s Waveforms Sine, square, ramp, harmonic, pulse, noise, DC voltage, arbitrary Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM Frequency Characteristics Sine 1μHz~160MHz Square/Pulse 1μHz~50MHz Slope 1μHz~4MHz Harmonic 1μHz~80MHz Noise (-3dB) 160MHz bandwidth Resolution 1μHz Arbitrary Waveform Frequency range 1μHz~40MHz Length 8~32Mpts Vertical resolution 16 bits Min rise/fall time (typical: 1Vpp) <5ns General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 8-inch TFT LCD, WVGA (800 x 480) Product color White and grey Product net weight 3.5kg Product size 336mm x 164mm x 108mm Standard accessories BNC-BNC cable x 2, USB interface cable, PC software CD, power cord Standard individual packing Carton box Standard quantity per carton 1pcs Standard carton measurement 405mm x 225mm x 265mmv SKU: n/a -
Laser Distance Meters
LM100 Laser Distance Meter
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, multiple angle HD display5. Physical and electronics leveler6. Multiple functions: Max/Min/continuous measurement, displacement calculation, data storage, and more7. Auto power off after 3 minutes without operationSKU: n/a -
DC Power Supplies
DC Power Supply UTP3305
Features:
1. Dual channel, two circuits of adjustableoutput voltage 0~32V and one circuit of fixed voltage 5V.
2. Master-slave tracking, constant voltageand current, Ⅰ, Ⅱ circuit can be used for master-slave tracking and used in parallelor in series.
3. Forced ventilation, temperature controlcooling system. When the temperature reaches 65℃, the device dissipatesheat automatically.
4. Display mode: LED digital tube display,can show voltage and current simultaneously.
5. Low ripple, low noise
6. High regulation: 0.01%
7. Output ON/OFF control
8. Constant voltage and constant currentoperation
9. Optional European standard outputterminal
10. Overload protection, reverse polarityprotection
SKU: n/a
Related products
-
Insulation Tester
Insulation Resistance Testers UT511
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
SKU: n/a -
-
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a
There are no reviews yet.