MIC-15k1 ,15kV Insulation Quality Analyzer
1 in stock
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
₨0
1 in stock
CompareMIC-15k1 meter is designed to measure insulation resistance of power objects, i.e.:
- single- and multicore cables,
- transformers,
- motors and generators,
- capacitors, switches and other devices installed in power stations.
It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.
| Weight | 6.3 kg |
|---|---|
| Dimensions | 39 × 31 × 17 cm |
Insulation resistance measurement
Measuring range according to IEC 61557-2
UN = 15 000 V: 50 kΩ…40.0 TΩ
Measurement with DC and increasing voltage (SV) for UISO = 15 kV
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…999 kΩ | 1 kΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 MΩ | 0,01 MΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 MΩ | 0,1 MΩ | ±(3% m.v. + 10 digits) |
| 100…999 MΩ | 1 MΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 GΩ | 0,01 GΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 GΩ | 0,1 GΩ | ±(3% m.v. + 10 digits) |
| 100…999 GΩ | 1 GΩ | ±(3,5% m.v. + 10 digits) |
| 1,00…9,99 TΩ | 0,01 TΩ | ±(7,5% m.v. + 10 digits) |
| 10,0…20,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
| 10,0…40,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
Ranges of measured resistance depending on the test voltage
| Voltage UISO | Measuring range |
|---|---|
| 50 V | 200 GΩ |
| 100 V | 400 GΩ |
| 250 V | 1,00 TΩ |
| 500 V | 2,00 TΩ |
| 1000 V | 4,00 TΩ |
| 2500 V | 10,00 TΩ |
| 5000 V | 20,0 TΩ |
| 10 000 V | 40,0 TΩ |
| 15 000 V | 40,0 TΩ |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…999 nF | 1 nF | ±(5% m.v. + 5 digits) |
| 1,00…49,99 µF | 0,01 µF | ±(5% m.v. + 5 digits) |
- Displaying measured capacity after RISO measurement
- For measurement voltages below 100 V the measurement error is not specified
Technical specification
- type of insulation acc. to: EN 61010-1 and IEC 61557 double
- measurement category acc. to EN 61010-1
- IV 1000 V (operating altitude ≤2000 m)
- IV 600 V (operating altitude ≤3000 m)
- ingress protection acc. to EN 60529: IP67 (IP40 for closed case)
- resistance to external interference voltages: up to 1550 V
- resistance to external interference currents: up to 10 mA
- advanced, digital filtering of interferences: 10 / 30 / 60 / 100 / 200 seconds
- test leads lock: yes
- power supply: Li-Ion 14.8 V rechargeable battery from network 90 V ÷ 260 V, 50 Hz/60 Hz
- dimensions: 390 x 308 x 172 mm
- weight: approx. 6.3 kg
- storage temperature: -25ºC…+70ºC
- operating temperature: -20ºC…+50ºC
- humidity: 20%…90%
- operating altitude: ≤3000 m
- reference temperature: +23ºC ± 2ºC
- reference humidity: 40%…60%
- display: graphical LCD
- number of RISO measurements with battery power supply: min. 1000 acc. to EN 61557-2
- data transmission: USB and Bluetooth
- quality standard: ISO 9001 compliant
- device meets the requirements of standards: EN 61010-1 and IEC 61557
- the product meets EMC requirements (immunity for industrial environment) with accordance to standards: EN 61326-1 and EN 61326-2-2
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-15k1 ,15kV Insulation Quality Analyzer”
-
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
-
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a
Related products
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3007A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Trac-Lok mode to conserve battery life on insulation and continuity tests.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• Backlight function to view the test results in dimly lit areas.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a
There are no reviews yet.