MIC-5001, 5000V Insulation Tester
5 in stock
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
₨0
5 in stock
CompareInsulation Resistance Meter
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 18 × 8 cm |
Insulation resistance measurement (two-lead)
Measurement range acc. to IEC 61557- 2 for RISOmin=VISOnom/IISOmax…5 TΩ (IISOmax=1 mA)
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 5.000 TΩ | 1 GΩ | ±(4% m.v. + 50 digits) |
Values of measured resistance depending on measurement voltage
| Voltage VISO | Measurement range |
|---|---|
| up to 100 V | 50 GΩ |
| 200 to 400 V | 100 GΩ |
| 500 to 900 V | 250 GΩ |
| 1000 to 2400 V | 500 GΩ |
| 2500 V | 2500 GΩ |
| 5000 V | 5 TΩ |
RampTest Insulation resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 4.999 TΩ | 0.001 TΩ | ±(5% m.v. + 40 digits) |
The measurement of breakdown voltage in RampTest mode
| Range | Resolution | Chosen UISO | Accuracy |
|---|---|---|---|
| 25.0 V to 99.0 V | 0.1 V | <600 V | ± 5% m.v. ± 10 digits |
| 100 V to 600 V | 1 V | <600 V | ± 5% m.v. ± 4 digits |
| 25 V to 999 V | 1 V | >600 V | ± 5% m.v. ± 5 digits |
| 1.00 kV to 5.00 kV | 10V | >600 V | ± 5% m.v. ± 4 digits |
DC and AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0 to 299.9 V | 0.1 V | ±(3% m.v. + 2 digits) |
| 300 to 750 V | 1 V | ±(3% m.v. + 2 digits) |
- frequency range: 45 to 65 Hz
VISO – measurement voltage
The acronym “m.v.” stands for a “measured reference value”
Electrical safety:
- type of insulation double, in acc. with EN 61010-1 and IEC 61557
- measurement category III 600 V (IV 300 V) in acc. EN 61010-1
- case protection rating in acc. EN 60529 IP6529: IP65
Other technical specifications::
- power supply of the meter NiMH 9.6 V – 2 Ah battery pack and power supply 12 V
- weight of the meter approx. 0.9 kg, 2 lbs
- dimensions 200 x 180 x 77 mm, 7.9 x 7 x 3 ins
- LCD segment display
- memory for measurement results: 990 cells, 11880 records
- transfer of measurement results data via USB
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-5001, 5000V Insulation Tester”
-
DC Power Supplies
YIHUA 303D DC Power Supply
Feature
303D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within the
rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant
voltage and constant current (CV/CC), automatic switching of working modes. Double digital display
shows output voltage and current independently. Several protection functions include current
limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design
is applied to production line of the plant, maintenance, laboratories and is also a necessary device
for the communication industry.
SKU: n/a -
Multimeters
UT125C Pocket Size Digital Multimeter
1. Small size, easy to carry and operate
2. 600V DC/AC voltage measurement3. 400mA DC/AC current measurement4. Resistance/Capacitance/Diode/Continuity test5. Frequency/Duty cycle measurement6. CE (EMC, LVD, RoHS), cETLus7. CAT III 600V8. 1m drop testSKU: n/a -
Earth Ground Resistance Testers
MRU-30 Earth Resistance and Resistivity Meter
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
SKU: n/a -
Related products
-
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a -
-
Insulation Tester
MIC-2501,2500V Insulation Resistance Meter
Electrical safety:
- type of insulation: double, in acc. with EN 61010-1 und IEC 61557
- measurement category: IV 600 V (III 1000 V) in acc. to EN 61010-1
- case protection rating in acc. with EN 60529: IP65
Other technical specifications:
- power supply of the meter SONEL L-1 NiMH 9,6 V; DC 12 V 2,5 A
- weight of the meter: approx. 0,9 kg
- dimensions: 200 x 180 x 77 mm
- display: LCD segment display
- measurement results memory: 990 cells, 11880 records,
- transmission of measurement results: USB
SKU: n/a -
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3005A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a
There are no reviews yet.