MIC-5001, 5000V Insulation Tester
5 in stock
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
₨0
5 in stock
CompareInsulation Resistance Meter
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 18 × 8 cm |
Insulation resistance measurement (two-lead)
Measurement range acc. to IEC 61557- 2 for RISOmin=VISOnom/IISOmax…5 TΩ (IISOmax=1 mA)
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 5.000 TΩ | 1 GΩ | ±(4% m.v. + 50 digits) |
Values of measured resistance depending on measurement voltage
| Voltage VISO | Measurement range |
|---|---|
| up to 100 V | 50 GΩ |
| 200 to 400 V | 100 GΩ |
| 500 to 900 V | 250 GΩ |
| 1000 to 2400 V | 500 GΩ |
| 2500 V | 2500 GΩ |
| 5000 V | 5 TΩ |
RampTest Insulation resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 4.999 TΩ | 0.001 TΩ | ±(5% m.v. + 40 digits) |
The measurement of breakdown voltage in RampTest mode
| Range | Resolution | Chosen UISO | Accuracy |
|---|---|---|---|
| 25.0 V to 99.0 V | 0.1 V | <600 V | ± 5% m.v. ± 10 digits |
| 100 V to 600 V | 1 V | <600 V | ± 5% m.v. ± 4 digits |
| 25 V to 999 V | 1 V | >600 V | ± 5% m.v. ± 5 digits |
| 1.00 kV to 5.00 kV | 10V | >600 V | ± 5% m.v. ± 4 digits |
DC and AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0 to 299.9 V | 0.1 V | ±(3% m.v. + 2 digits) |
| 300 to 750 V | 1 V | ±(3% m.v. + 2 digits) |
- frequency range: 45 to 65 Hz
VISO – measurement voltage
The acronym “m.v.” stands for a “measured reference value”
Electrical safety:
- type of insulation double, in acc. with EN 61010-1 and IEC 61557
- measurement category III 600 V (IV 300 V) in acc. EN 61010-1
- case protection rating in acc. EN 60529 IP6529: IP65
Other technical specifications::
- power supply of the meter NiMH 9.6 V – 2 Ah battery pack and power supply 12 V
- weight of the meter approx. 0.9 kg, 2 lbs
- dimensions 200 x 180 x 77 mm, 7.9 x 7 x 3 ins
- LCD segment display
- memory for measurement results: 990 cells, 11880 records
- transfer of measurement results data via USB
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-5001, 5000V Insulation Tester”
-
DC Power Supplies
YIHUA 3010D DC Power supply
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
- High stabilized output voltage.
- Short circuit protection.
5.Over loading and current protection.
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Rework & Soldering Station
YIHUA 908D-II LED DIGITAL THERMOSTAT ELECTRONIC SOLDERING IRON
1.Portable anti-static thermostat soldering iron, using latest advanced temperature control circuit for precise temperature control.
2.Heating core uses high quality and durable materials, extending its service life.
3.The handle uses completely new environmentally friendly and heat resistant materials.
A high temperature spacer between the handle and the heating tube prevents heat
transfer and ensures comfortable use.4.LED digital display, allowing users to directly monitor the temperature and making
soldering work easier.5.It is equipped with a lock temperature switch. When it is opened to the lock temperature
state, the temperature is not adjustable; when the switch is turned to the unlocked state,
the temperature adjustment is resumed.6.The 908D is an upgraded version of the 908D, featuring the 908D, with digital temperature
correction, 0/510/30 minute sleep, and Fahrenheit/Celsius display conversion.SKU: n/a -
Clamp Meters
CLAMP METER AC MT 87
- ) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm
- 1) 3 1/2 digits LCD with a Max. Reading of 1999
- 2) Diode and Buzzer function
- 3) Low battery indication
- 4) Overload protection
- 5) Data hold for easy reading
- 1) DC voltage: 600V (?1.0%)
- 2) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm2
SKU: n/a
Related products
-
Insulation Tester
DIGITAL INSULATION / CONTINUITY TESTER MODEL 3005A
• Bargraph to display insulation resistance.
• Displays the value of external AC voltage along with flashing symbol.
• Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
• Live circuit warning beeper.
• Releasing the test button automatically discharges the charges stored in the circuit under test.
• 200mA continuity measuring current to IEC 61557.
• Minimum 1mA current on insulation tests to IEC 61557.SKU: n/a -
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a
There are no reviews yet.