Insulation Tester
MIC-5001, 5000V Insulation Tester
Availability:
5 in stock
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
₨0
5 in stock
CompareInsulation Resistance Meter
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 18 × 8 cm |
Insulation resistance measurement (two-lead)
Measurement range acc. to IEC 61557- 2 for RISOmin=VISOnom/IISOmax…5 TΩ (IISOmax=1 mA)
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(3% m.v. + 20 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(3% m.v. + 20 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(3% m.v. + 20 digits) |
| 1.000 to 5.000 TΩ | 1 GΩ | ±(4% m.v. + 50 digits) |
Values of measured resistance depending on measurement voltage
| Voltage VISO | Measurement range |
|---|---|
| up to 100 V | 50 GΩ |
| 200 to 400 V | 100 GΩ |
| 500 to 900 V | 250 GΩ |
| 1000 to 2400 V | 500 GΩ |
| 2500 V | 2500 GΩ |
| 5000 V | 5 TΩ |
RampTest Insulation resistance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0.0 to 999.9 kΩ | 0.1 kΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 MΩ | 0.001 MΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 MΩ | 0.01 MΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 MΩ | 0.1 MΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 9.999 GΩ | 0.001 GΩ | ±(5% m.v. + 40 digits) |
| 10.00 to 99.99 GΩ | 0.01 GΩ | ±(5% m.v. + 40 digits) |
| 100.0 to 999.9 GΩ | 0.1 GΩ | ±(5% m.v. + 40 digits) |
| 1.000 to 4.999 TΩ | 0.001 TΩ | ±(5% m.v. + 40 digits) |
The measurement of breakdown voltage in RampTest mode
| Range | Resolution | Chosen UISO | Accuracy |
|---|---|---|---|
| 25.0 V to 99.0 V | 0.1 V | <600 V | ± 5% m.v. ± 10 digits |
| 100 V to 600 V | 1 V | <600 V | ± 5% m.v. ± 4 digits |
| 25 V to 999 V | 1 V | >600 V | ± 5% m.v. ± 5 digits |
| 1.00 kV to 5.00 kV | 10V | >600 V | ± 5% m.v. ± 4 digits |
DC and AC voltage measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0 to 299.9 V | 0.1 V | ±(3% m.v. + 2 digits) |
| 300 to 750 V | 1 V | ±(3% m.v. + 2 digits) |
- frequency range: 45 to 65 Hz
VISO – measurement voltage
The acronym “m.v.” stands for a “measured reference value”
Electrical safety:
- type of insulation double, in acc. with EN 61010-1 and IEC 61557
- measurement category III 600 V (IV 300 V) in acc. EN 61010-1
- case protection rating in acc. EN 60529 IP6529: IP65
Other technical specifications::
- power supply of the meter NiMH 9.6 V – 2 Ah battery pack and power supply 12 V
- weight of the meter approx. 0.9 kg, 2 lbs
- dimensions 200 x 180 x 77 mm, 7.9 x 7 x 3 ins
- LCD segment display
- memory for measurement results: 990 cells, 11880 records
- transfer of measurement results data via USB
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-5001, 5000V Insulation Tester”
-
Power Quality Analyzer
PQM-707 Power Quality Analyzer
-
Features:
- 7″ touch screen – intuitive operating
- CAT IV 600V – high safety
- all parameters acc. to class S – high accuracy of measurements
- Li-Ion rechargeable battery – higher mobility
- removable memory card – recording data with no restrictions
Possible measurements:
- Measurements according to EN 50160,
- Voltage L1, L2, L3, N-PE (five inputs),
– average, minimum, maximum values, range to 760 V, ability to work with voltage transformers, - Current L1, L2, L3, N (four inputs),
– average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers, - Crest factor for voltage and current,
- Frequency from 40 Hz to 70 Hz ,
- Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
- Power recording:
- Budeanu method,
- IEEE 1459,
- Active, reactive, apparent energy,
- Power factor, cosφ, tgφ,
- Up to 50th harmonics for voltage and current,
- Total Harmonic Distortion (THD) for voltage and current,
- Short-term (PST) and long-term (PLT) flicker,
- Unbalance of voltage and current,
- Current and voltage events registration including waveforms and RMS graphs half period,
- Inrush current
- Calculator of energy tariffs
- ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
SKU: n/a -
-
Digital Multi Meter
UNI T Benchtop Digital Multimeter UT8802E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a
Related products
-
Insulation Tester
Insulation Resistance Testers UT511
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
SKU: n/a -
Insulation Tester
MIC-15k1 ,15kV Insulation Quality Analyzer
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
SKU: n/a
There are no reviews yet.