MRU-30 Earth Resistance and Resistivity Meter
3 in stock
-
It allows to take the measurements of:
- earthing resistance using auxiliary electrodes,
- earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
- earthing resistance using double clamps for measuring multiple earthing without underground connections.
- ground resistivity (Wenner method),
- continuity of equipotential bondings and protective
- conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.
Additionally:
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network
- with frequency 50Hz, 60Hz,
- selection of maximum measuring voltage (25V and 50V),
- introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
- memory of 990 measurements (10 banks of 99 cells each),
- calibration of clamp used,
- data transmission to the computer (USB),
- indication of battery state.
₨0
3 in stock
CompareThe Sonel MRU-30 uses most known methods of earth resistance measurements. Tests can be performed using the 3-pole, 4-pole, 3-pole with auxiliary clamp and also, additionally, the MRU-30 employs the two clamp method of measurement, without the use of auxiliary test rods which can’t be used in some situations. Complementary features of the MRU-30 are measurements of soil resistivity, continuity measurement of protective and equipotential conductors and, using clamps, leakage currents and interference voltages.
- Robust and weatherproof (IP65) – no ingress of dust, water protected by a nozzle against enclosure from any direction.
- Ergonomic casing – small and handy casing to make the measurements more convenient than before.
- Built-in rechargeable battery – saving time to replace flat batteries; can be recharged from Power Bank and Cigarette Lighter Socket!
- Clear on-screen notes – displayed on screen before and after the measurement to alert user of possible dangers and irregularities.
- Many measurement methods available in a small, portable casing
| Weight | 5 kg |
|---|---|
| Dimensions | 20 × 15 × 7 cm |
Measurement of interference voltage UN (RMS)
| Range | Resolution | Accuracy |
| 0…100 V | 1 V | ±(10% m.v. + 1 digit) |
Measurement of continuity of equipotential bondings and protective conductors (Rcont)
measurement range to IEC 61557-4:2007: 0,13 Ω…1999 Ω
| Range | Resolution | Accuracy |
| 0,00…9,99 Ω | 0,01 Ω | ±(2% m.v. + 3 digits) |
| 10,0…99,9 Ω | 0,1 Ω | |
| 100…1999 Ω | 1 Ω |
• measurement current: under short circuit >200mA
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)
Measurement of earthing resistance (method 3- and 4-pole)
measurement range to IEC 61557-5:2007: 0,53 Ω…9999 Ω (dla 50 V)
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(3% m.v. + 3 digits) |
| 20,0…199,9 Ω | 0,1 Ω | |
| 200,0…1999 Ω | 1 Ω | ±5% m.v. |
| 2000…9999 Ω | 1 Ω | ±8% m.v. |
• measurement current: under short circuit >20 mA,
• voltage on open terminals: selectable 25 V AC or 50 V AC,
• frequency of measurement current: 125 Hz (for networks 50 Hz) or 150 Hz (for 60 Hz).
Measurement of multiple earthing esistance with using the clamp and auxiliary electrodes (3p + clamp)
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(3% m.v. + 3 digits) |
| 20,0…199,9 Ω | 0,1 Ω | |
| 200…1999 Ω | 1 Ω | ±5% m.v. |
| 2000…9999 Ω | 1 Ω | ±8% m.v. |
• voltage on open terminals: selectable 25 V AC or 50 V AC,
• measurement current: under short circuit >20 mA,
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz (for networks 60 Hz)
Measurement of resistance of auxiliary electrodes RH i RS
| Range | Resolution | Accuracy |
| 0…999 Ω | 1 Ω | ±(5% m.v.+ 8 digits) |
| 1,00k…9,99 kΩ | 0,01 kΩ | |
| 10,0k…19,9 kΩ | 0,1 kΩ |
Measurement of multiple earthing resistance with using double clamps
| Range | Resolution | Accuracy |
| 0,00…19,99 Ω | 0,01 Ω | ±(10% m.v. + 8 digits) |
| 20,0…99,9 Ω | 0,1 Ω | ±(20% m.v. + 3 digits) |
• frequency of measurement current: 125 Hz (for networks 50 Hz) and 150 Hz
(for networks 60 Hz)
Measurement of ground resistivity
Measurement method: Wenner, ρ=2πLRE
| Range | Resolution | Accuracy |
| 0,00…9,99 Ωm | 0,01 Ωm | depending on measurement accuracy RE with 4p method, but not less than ±1 digit |
| 10,0…99,9 Ωm | 0,1 Ωm | |
| 100…999 Ωm | 1 Ωm | |
| 1,00…9,99 kΩm | 0,01 kΩm | |
| 10,0…99,9 kΩm | 0,1 kΩm | |
| 100…999 kΩm | 1 kΩm |
L – distance between probes: 1…50 m.. or 1…150 ft
Electric security:
- type of insulation: double, according to EN 61010-1 i IEC 61557,
- measurement category: CAT III 300V wg EN 61010-1,
- protection class acc. to EN 60529: IP65,
Rated operational conditions:
- operation temperature: -10…+55°C,
- storage temperature: -20…+80°C,
- humidity: 20…90%,
Other technical data:
- LCD display: segment, backlit,
- dimensions: 200x150x74 mm.
Brand
SONEL
Based on 0 reviews
Be the first to review “MRU-30 Earth Resistance and Resistivity Meter”
-
LCR Meter
MS8910 Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a -
Soldering Iron
YH 907F IRON FOR 898BD+
- This 907F handle (5-pin) is ONLY for genuine YIHUA 939D+ soldering stations. (To avoid incompatibility issue, please correctly identify the model number & pin number from your machine. )
- Note：this 907F soldering iron handle is not compatible with other stations except the genuine YIHUA 939D+ soldering station.
- 1 Year (USA Exclusive) – Our team is providing professional assistance 24/7 right on Amazon.Welcome to drop us a message at Amazon’s Messaging System if you have any queries with this spare part. We will help confirm the compatibility and recommend you the safest match part.
SKU: n/a -
Voltage Detector
UT12M-US AC Voltage Detector
features:
1. Auto power off
2. Buzzer
3. LED indication
4. IP 67
5. AC voltagedetection
6. High/Lowvoltage mode
7. Magnetic solenoiddetectionApplications:
Low voltage mode: Low-voltage motor (<90V), audio systems, arc welding machines,underground mining lighting, cables with thick insulation layer and other weakelectromagnetic AC signals.
High voltage mode: Urban electric supply and three-phase systems (90~1000V). Forexample, power distribution units, electrical panels, electrical appliances.SKU: n/a
Related products
-
Earth Ground Resistance Testers
MRU-10 Earth Resistance Meter
It allows to:
- measure earthing resistance using auxiliary electrodes,
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
- selection of maximum measuring voltage (25 V and 50 V),
- indication of battery state.
SKU: n/a -
Earth Ground Resistance Testers
UT278A Clamp Earth Ground Testers
UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.
SKU: n/a -
Earth Ground Resistance Testers
MRU-21 Earth Resistance Meter
Possible measurements:
- earth resistance measurment with 3-pole method,
- measurement of continuity of equipotential bondings and protective conductors with auto-zero function – with current 200 mA,
- resistance measurement using 2-pole method.
SKU: n/a -
Earth Ground Resistance Testers
UT521 Earth Groud Testers
UT520 series earth resistance tester hasthe functions of backlight display, low battery display, data hold, datastorage, auto power off and power saving. It can not only be used for accurate three-wiremeasurement but also simple two-wire measurement.
It is applicable to measuring the earthresistance of all kinds of electrical power system, electrical equipment and anti-thunderequipment. It can also measure the earth voltage. It is applicable to testingoperating earth systems of smelting, communication, manufacture, fossil oil,national defense, electricity, chemical industry and construction.
SKU: n/a
There are no reviews yet.