MS 2109A ACA DCA Digital Clamp Meters
10 in stock
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery Display
₨10,528 ₨13,162
10 in stock
Compare● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery Display
| Weight | 0.3 kg |
|---|---|
| Dimensions | 22 × 8 × 3 cm |
| Specifications | Range | Resolution | Accuracy | |
| DC Voltage | 600mV/6V/60V/600V | 0.1mV/0.001V/0.01V/1V | ±(0.7%+2) | |
| AC Voltage | 6V/60V | 0.001V/0.01V | ±(0.8%+3) | |
| 600V | 1V | ±(1.0%+4) | ||
| DC Current | 60A/600A | 0.01A/0.1A | ±(3.0%+6) | |
| AC Current | 60A/600A | 0.01A/0.1A | ±(2.5%+6) | |
| Resistance | 600Ω/6kΩ/60kΩ/600kΩ | 0.1Ω/0.001kΩ/0.01kΩ/0.1kΩ | ±(0.8%+3) | |
| 6MΩ/60MΩ | 0.001MΩ/0.01MΩ | ±(1.2%+3) | ||
| Capacitance | 40nF/400nF/4µF | 0.01nF/0.1nF/0.001µF | ±(4.0%+5) | |
| 40µF/400µF/4000µF | 0.01µF/0.1µF/1µF | ±(4.0%+5) | ||
| Frequency (A) | 100Hz/1kHz | 0.01Hz/0.1Hz | ±(1.5%+5) | |
| Frequency (V) | 100Hz/1kHz/10kHz | 0.01Hz/0.1Hz/0.001kHz | ±(1.5%+5) | |
| Frequency (Hz/Duty) |
10Hz/100Hz/1kHz/10kHz
|
0.001Hz/0.01Hz/0.1Hz/0.001kHz
|
±(0.5%+3) | |
| 100kHz/1MHz/10MHz | 0.01kHz/0.1kHz/0.001MHz | ±(0.5%+3) | ||
| Duty Cycle | 0.1%~99.9% | 0.1% | ±(3.0%+5) | |
| Temperature | -20℃~0℃ | 1℃ | ±(3.0%+4) | |
| 1℃~400℃ | 1℃ | ±(1.0%+3) | ||
| 401℃~1000℃ | 1℃ | ±(2.0%) |
Brand
MASTECH
Based on 0 reviews
Be the first to review “MS 2109A ACA DCA Digital Clamp Meters”
-
Oscilloscopes
UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope
Analog bandwidth 150MHz 250MHz Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels) Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) Memory depth 70Mpts Waveform capture rate 200,000wfms/s Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display ) Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall] Input impedance (1MΩ±1%) II (20pF±3pF) Input impedance digital (101kΩ±1%) II (9pF±1pF) Vertical scale 1mV/div~20 V/div (1 MΩ) DC gain accuracy <5mV: ±3%, ≥5mV: ±2% Waveform record 100,000 frames Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
CAN, LIN, FlexRayBus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations Auto measurements
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
-Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→AMeasurement display 5 types Measurement statistics Average, Max, Min, standard deviation and number of measurements Frequency counter 6 bits Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA Standard Accessories
USB interface cable UT-D14 Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06 Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05 16CH Logic analyzer probe UT-15M SKU: n/a -
Earth Ground Resistance Testers
MRU-10 Earth Resistance Meter
It allows to:
- measure earthing resistance using auxiliary electrodes,
- measurement of resistance of auxiliary electrodes RS and RH,
- measurement of interference voltage,
- measurement in the presence of interference voltage in the power network with frequency 50 Hz and 60 Hz,
- selection of maximum measuring voltage (25 V and 50 V),
- indication of battery state.
SKU: n/a
Related products
-
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
-
Clamp Meters
UT210E ACA DCA Digital Clamp Meters
Main Features
1. Auto range, 2~3/s sampling rate
2. True RMS measurement
3. VFC, frequency conversion function
4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw
5. Zero mode
6. LCD backlight, data hold
7. Auto power off, low battery indication and overload protection
8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)
9. Complies with CE (European Union) directives
SKU: n/a
There are no reviews yet.