CMM-10 Multimeter
5 in stock
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
₨11,844 ₨14,478
5 in stock
CompareThe most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
| Weight | 0.2 kg |
|---|---|
| Dimensions | 14 × 7 × 4 cm |
Frequency measurement
| Range | Resolution | Accuracy |
| 5,000 Hz | 0,001 Hz | ±(1,5% m.v. + 5 digits) |
| 50,00 Hz | 0,01 Hz | |
| 500,0 Hz | 0,1 Hz | ±(1,2% m.v. + 3 digits) |
| 5,000 kHz | 0,001 kHz | |
| 50,00 kHz | 0,01 kHz | |
| 500,0 kHz | 0,1 kHz | |
| 5,000 MHz | 0,001 MHz | ±(1,5% m.v. + 4 digits) |
| 10,00 MHz | 0,01 MHz |
- sensitivity: ≥8 V RMS
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,1…99,9% | 0,1% | ±(1,2% m.v. + 2 digits) |
- sensitivity: ≥8 V RMS,
- pulse width: 100µs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy* |
| -20°C…+760°C | 1°C | ±(3% m.v. + 5°C, 9°F) |
| -4°F…+1400°F | 1°F |
*) probe (K type) accuracy not included
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(0,5% m.v. + 2 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 2 digits) |
| 40,00 V | 0,01 V | ±(1,2% m.v. + 2 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(1,5% m.v. + 2 digits) |
- input impedance: 7,8 MΩ
AC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,1 mV | ±(1,5% m.v. + 70 digits) |
| 4,000 V | 0,001 V | ±(1,2% m.v. + 3 digits) |
| 40,00 V | 0,01 V | ±(1,5% m.v. + 3 digits) |
| 400,0 V | 0,1 V | |
| 600 V | 1 V | ±(2,0% m.v. + 4 digits) |
- input impedance: 7,8 MΩ,
- frequency range: 50…400 Hz.
DC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,0% m.v. + 3 digits) |
| 4 000 μA | 1 μA | ±(1,5% m.v. + 3 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(2,5% m.v. + 5 digits) |
| 10,00 A | 0,01 A |
AC current measurement
| Range | Resolution | Accuracy |
| 400,0 μA | 0,1 μA | ±(1,5% m.v. + 5 digits) |
| 4 000 μA | 1 μA | ±(1,8% m.v. + 5 digits) |
| 40,00 mA | 0,01 mA | |
| 400,0 mA | 0,1 mA | |
| 4,000 A | 0,001 A | ±(3,0% m.v. + 7 digitgs) |
| 10,00 A | 0,01 A |
- frequency range: 50…400 Hz.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,0 Ω | 0,1 Ω | ±(1,2% m.v. + 4 digits) |
| 4,000 kΩ | 0,001 kΩ | ±(1,0% m.v. + 2 digits) |
| 40,00 kΩ | 0,01 kΩ | ±(1,2% m.v. + 2 digits) |
| 400,0 kΩ | 0,1 kΩ | |
| 4,000 MΩ | 0,001 MΩ | |
| 40,00 MΩ | 0,01 MΩ | ±(2,0% m.v. + 3 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,00 nF | 0,01 nF | ±(5,0% m.v. + 7 digits) |
| 400,0 nF | 0,1 nF | ±(3,0% m.v. + 5 digits) |
| 4,000 μF | 0,001 μF | |
| 40,00 μF | 0,01 μF | |
| 100,0 μF | 0,1 μF | ±(5,0% m.v. + 5 digits) |
“m.v” = measured value
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT II 600 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP40
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,3 mA, U0 = 1,5 V DC
- continuity test: I<0,3 mA, sound signal for R<50 Ω
- over range indication: 0L displayed
- sampling rate: 2 times per second
- input impedance: 7,8 MΩ (V AC/DC)
- display: 5000 counts LCD display with function indication
- dimensions: 138 x 68 x 37 mm
- weight: approx. 210 g
- fuses: mA, µA range: 0,5 A/250 V fast; A range: 10 A/250 V fast
- auto power OFF: 30 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Rated operational conditions:
- operating temperature: 0…+50°C at <70% rel. humidity
- storage temperature: -20…+60°C at <80% rel. humidity
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-10 Multimeter”
-
Clamp Meters
UT202BT Smart AC Clamp Meter
1. Button-design clamp meter
2. One-hand operation and easy to use
3. True RMS / 9999 counts
4. Jaw opening: 28mm
5. Bluetooth 5.0
6. 600V DC voltage measurement
7. 600V AC voltage measurement
8. 600A AC current measurement
9. Inrush current measurement
10. Dual display: V+HZ and A+HZ
11. Temperature measurement
12. Low pass filter measurement
13. Bright backlight / Flashlight
14. Non-contact voltage (NCV)
15. CAT III 600VSKU: n/a -
Analog Multimeters
ANALOG METER DE 960
Features Of YX-960 TR Handheld Analog Multimeter:
- Excellent DC resolution factor of 2mV.
- Expanded resistance measurement from 020 to 200M.
- Series capacitor DC to enable measurement of only AC components.
- A large and bright meteor with a scale length of 80mm.
- The sensitivity of 44pA at full scale.
- Fuse and diode protection.
- Measures hFE of transistor directly.
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Multimeters
UT125C Pocket Size Digital Multimeter
1. Small size, easy to carry and operate
2. 600V DC/AC voltage measurement3. 400mA DC/AC current measurement4. Resistance/Capacitance/Diode/Continuity test5. Frequency/Duty cycle measurement6. CE (EMC, LVD, RoHS), cETLus7. CAT III 600V8. 1m drop testSKU: n/a -
Environment Meters
UT361 Anemoscopes
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
SKU: n/a
Related products
-
-
-
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a
There are no reviews yet.