CMM-40 Industrial Multimeter
5 in stock
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
₨30,270 ₨34,221
5 in stock
CompareIndustrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 19 × 8 × 5 cm |
Frequency measurement (electronic)
| Range | Resolution | Accuracy |
| 40,000 Hz | 0,001 Hz | ±(0,1% m.v. + 1 digit) |
| 400,00 Hz | 0,01 Hz | |
| 4,0000 kHz | 0,0001 kHz | |
| 40,000 kHz | 0,001 kHz | |
| 400,00 kHz | 0,01 kHz | |
| 4,0000 MHz | 0,0001 MHz | |
| 40,000 MHz | 0,001 MHz | |
| 100,00 MHz | 0,01 MHz | not speccified |
- Sensitivity: 0.8 V rms min. @ 20% to 80% duty cycle and <100 kHz; 5 V rms min @ 20% to 80% duty cycle and > 100 kHz
Frequency measurement (electrical)
| Range | Resolution | Accuracy |
| 40,00 Hz…10,000 kHz | 0,01 Hz…0,001 kHz | ± 0,5% m.v. |
- sensitivity: 1 V rms
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,10…99,00% | 0,01% | ±(1,2% m.v. + 2 digits) |
- pulse width: 100μs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy |
| -50,0°C…+1200,0°C | 0,1°C | ±(1% m.v. + 2,5°C) |
| -58,0°F…+2192,0°F | 0,1°F | ±(1% m.v. + 4,5°F) |
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,01 mV | ±(0,06% m.v. + 4 digits) |
| 4,0000 V | 0,0001 V | |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V | ±(0,1% w.m. + 5 cyfr) |
AC voltage measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 mV | 0,01 mV | ±(1% m.v. + 40 digits) |
| 4,0000 V | 0,0001 V | ±(1% m.v. + 30 digits) |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V |
- frequency range: 50…1000 Hz.
AC/DC current measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 μA | 0,01 μA | dla DC ±(1,0% m.v. + 3 digits)
dla AC ±(1,5% m.v. + 30 digits) |
| 4 000,0 μA | 0,1 μA | |
| 40,000 mA | 0,001 mA | |
| 400,00 mA | 0,01 mA | |
| 10,000 A | 0,001 A |
- 20 A: 30 sec max with reduced accuracy.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,00 Ω | 0,01 Ω | ±(0,3% m.v. + 9 digits) |
| 4,0000 kΩ | 0,0001 kΩ | ±(0,3% m.v. + 4 digits) |
| 40,000 kΩ | 0,001 kΩ | |
| 400,00 kΩ | 0,01 kΩ | |
| 4,0000 MΩ | 0,0001 MΩ | |
| 40,000 MΩ | 0,001 MΩ | ±(2,0% m.v. + 10 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,000 nF | 0,001 nF | ±(3,5% m.v. + 40 digits) |
| 400,00 nF | 0,01 nF | |
| 4,0000 μF | 0,0001 μF | ±(3,5% m.v. + 10 digits) |
| 40,000 μF | 0,001 μF | |
| 400,00 μF | 0,01 μF | |
| 4000,0 μF | 0,1 μF | ±(5% m.v. + 10 digits) |
| 40,000 mF | 0,001 mF |
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,9 mA, U0 = 2,8 V DC
- continuity test: I<0,35 mA, sound signal for R<35 Ω
- over range indication: 0L displayed
- crest factor: ≤ 3 at full scale up to 500 V; decreasing linearly to ≤ 1,5 at 1000 V
- PEAK: captures peaks >1 ms
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC), 9 MΩ (V AC)
- display: 40000 counts backlit LCD with bargraph, 4¾ digits
- store capacitance: 2000
- dimensions: 187 x 81 x 55 mm
- weight: 342 g
- fuses: mA, µA range: 0,5 A/1000 V ceramic fast blow; A range: 10 A/1000 V ceramic fast blow
- auto power OFF: 15 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT III 1000 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP67
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 87°F (31°C); decreasing linearly to 50% at 104°F (40°C)
- operating altitude: max 2000 m
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-40 Industrial Multimeter”
-
Laser Distance Meters
LM50D Laser Distance Meter (Curvature Edition)
1. Ergonomic exterior, comfortable handling
2. Millimeter accuracy3. Large, HD display4. Auto voice and audio indication5. Curvature measurement, test curve length via the roller6. Auto power off after 3 minutes without operation7. Convenient angle measurement via electronic levelingSKU: n/a -
Clamp Meters
TITAN Clamp Multimeter TN88A in Pakistan
Specifications:
- TITAN TN88A Digital Clamp Meter 500V Insulation Tester
- DC voltage: 1000V ± (0.8% + 2)
- AC voltage: 750V ± (1.2% + 4)
- Alternating current: 200A / 1000A ± (2.5% + 5)
- Resistance: 200Ω / 20kΩ ± (1.0% + 2)
- Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
- High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
- The continuity of the alarm
- Low screen voltage
- Data retention
- Input impedance: 10MΩ
- Sampling rate: 3 times / s
- Maximum display: 1999
- Jaw opening: 50mm
SKU: n/a -
Tool Kits
JM SK05
Feature:
PVC plastic material, environmental friendly, not easy to deformation, high oil-resistant and corrosion-resistant.
Brand new and high quality.
Suitable for screen separation of mobile phones and tablets.
ABC industrial plastic material, more durable and higher deformation-resistant than usual plastic.
Heavy duty suction cup.
Can be reused many times.
Used to remove phone and tablet glass panels.
Ergonomic design,easy to use.SKU: n/a -
Related products
-
Multimeters
UT107 Handheld Automotive Multi-Purpose Meters
Main Features
1. Dwell angle measurement (DWELL)
2. Tach measurement (RPM)
3. Data hold
4.12V battery test, duty ratio measurement
5. Measurement input port prompt
6. Low battery, auto polarity and over-range indication
7. Complies with CE (European Union) directives
SKU: n/a -
Multimeters
UT18C Voltage And Continuity Testers
UT18 series of test pen with measuring AC and DC voltage (including the three-phase alternating current) measurement, phase of three-phase AC power indicator, on-off test, RCD test, single pen measurement (can determine the zero line or wire), self checking, no battery detection and other functions.
Suitable for: smelting, electronics, manufacturing, defense, electric power, petroleum, chemical industry. Also used to solve complex problems of electronic, factory automation, power distribution and electrical equipment in.SKU: n/a -
Multimeters
UT61B Modern Digital Multimeters
UT61 Series Digital Multimeters are products designed for multi-functional, high precision, high performance and automatic measurements.
- 1、Large LCD screen；
- 2、High resolution analog pointer display；
- 3、Full range overload protection；
- 4、Data hold, REL, Peak value measurement；
- 5、Low battery indication, backlight, and sleep mode；
- 6、External interface supports RS-232C and USB cable.UT61Series can measure AC/DC voltage and current, resistance, diode, circuit continuity, capacitance, frequency, temperature, hFE, electromagnetic induction, etc.
UT61 Series complies with the standard IEC61010: CAT. III 1000V, CAT.IV 600V; they are widely used in Industrial Production and Service, Technological Research and Design, College Education (Laboratory, Courses), and Automotive Industry.
SKU: n/a
There are no reviews yet.