-8%

UT195M Professional Digital Multimeter

Availability:

10 in stock


Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. Motor phase sequence measurement with 2 probes

9. 20A current measurement (max 30 seconds)

34,000 36,790

10 in stock

Compare

Features

1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V

2. Large 6000-count LCD screen

3. True RMS

4. ACV 750V 5kHz bandwidth

5. Flashlight

6. Auto LCD backlight controlled by light sensor (can be turned off)

7. LoZ voltage test, for ghost voltage measurement

8. Motor phase sequence measurement with 2 probes

9. 20A current measurement (max 30 seconds)

Category:
Weight 0.5 kg
Dimensions 19 × 9 × 6 cm
Specifications Range Best Accuracy
Model UT195M
DC voltage 600mV ~ 1000V ±(0.5%+3)
AC voltage 600mV ~ 750V ±(0.7%+3)
LoZ ACV 600.0V ±(2.0%+3)
DC current (A) 600.0μA ~ 20A ±(0.8%+3)
AC current (A) 600.0μA ~ 20A ±(1.0%+3)
Resistance (Ω) 600.0Ω ~ 60.00MΩ ±(0.8%+2)
Capacitance 6.000nF ~ 60.00mF ±(3%+5)
Frequency 60.00Hz ~ 40.00MHz ±(0.1%+4)
Duty ratio 0.1% ~ 99.9% N/A
Temperature °C -40 ~ 1000°C ±(1.5%+4°C)
Temperature °F -40 ~ 1832°F ±(2.0%+5°F)
Features
Display count 6000
Display interface (HTN) Single display
Measurement of digital conversion rate times/s 3
True RMS
AC voltage frequency response 45 ~1kHz
AC current frequency response 45 ~1kHz
Low pass filter test √ (1kHz 3dB attenuation)
Diode/Continuity test 3V
Auto/Manual range
Auto power off
Continuity buzzer
Low battery indication
Data hold
MAX/MIN
Function selection
Flashlight
Auto backlight
Working temperature 0 °C ~40 °C
2m drop proof
Protection rating IP65
General Characteristics
Power supply 9V 6F22 carbon-zinc or 6LR61 alkaline battery
LCD size 66mm × 51mm
Device color Red and grey
Device weight 473g
Device size 195mm × 95mm × 58mm
Standard accessories Testing probes, battery, carrying bag
Standard individual packing Gift box, user manual,

point type temperature probe

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT195M Professional Digital Multimeter”

There are no reviews yet.

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • TND 500VA

    0 out of 5
    (0)

    Input Voltage=140-250
    Output Voltage=220
    Copper Wind
    Analog Display
    Under and Over Volt Indication
    Under Volt Protection
    Dual Output Socket 110/220

    SKU: n/a
  • UT603 Inductance Capacitance Meters

    0 out of 5
    (0)

    UT600 series RCL meter is a kind of 3.5-bithandheld digital meter with stable performance, safety, reliability, highaccuracy and manual range. It can be used to measure the magnification times β of audion, diode forward voltage drop and circuit continuity. UT601has wide capacitance measurement range from 0.1pF~20mF and highaccuracy. UT602 can hold data. UT 600 series is applicable to testingresistance, capacitance and inductance of electronic laboratory, productionline, maintenance point and teaching. It is the ideal tool of maintaining formany users.

    SKU: n/a
  • UT216A 600A Digital Clamp Meters

    0 out of 5
    (0)

    UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
    UTD216A (main features)

    • 1、600A AC current measurement
    • 2、True RMS response for ACV and ACA
    • 3、99.99mF capacitance measurement
    • 4、Non-contact voltage detection with LED indication
    • 5、Flashlight for working at dark environment
    SKU: n/a
  • RF-7050TVP+

    0 out of 5
    (0)
    SKU: n/a