UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
UT81C Scope Digital Multimeter
9 in stock
UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one. Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer.
₨45,000 ₨46,000
9 in stock
CompareWeight | 0.5 kg |
---|---|
Dimensions | 20 × 10 × 5 cm |
Specifications | Range | UT81C |
DMM Specifications | ||
DC voltage (V) | 1000V | ±(0.8%+8) |
AC voltage (V) | 750V | ±(1%+15) |
DC current (A) | 10A | ±(1%+8) |
AC current (A) | 10A | ±(1.5%+8) |
Resistance (Ω) | 40MΩ | ±(1%+5) |
Capacitance (F) | 100μF | ±(3%+8) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Scope Specifications | ||
Bandwidth | 16MHz | |
Sampling rate | 80MS/s | |
Vertical accuracy | ±(5%+1) | |
Vertical sensitivity | 20mV/div~500V/div (1-2-5) | √ |
Time-base accuracy | ±(0.01%+1) | |
Time-base range | 50ns/div – 5s/div(1-2-5) | |
Features | ||
Display count | 4000 | |
Auto range | √ | |
Duty cycle | 0.1~99.9% | √ |
Diode | √ | |
Auto power off | √ | |
Continuity buzzer | √ | |
Display | 160 x 160 monochrome | √ |
Trigger types | Auto run/Normal/Single shot | √ |
Memory | 10 screens and setups | √ |
Contrast and brightness setup | √ | |
Low battery indication | √ | |
USB interface | √ | |
LCD backlight | √ | |
Input impedance for DCV | Around 10MΩ | √ |
General Characteristics | ||
Power | 1.5V battery (R6) x 4 | |
Display | 60mm x 60mm | |
Product color | Red and grey | |
Product net weight | 498g | |
Product size | 200mm x 100mm x 48mm | |
Standard accessories | Batteries, test lead, alligator clip, USB interface cable, PC software CD | |
Standard individual packing | Gift box, English manual | |
Standard quantity per carton | 12pcs | |
Standard carton measurement | 485mm x 450mm x 260mm (0.057CBM per standard carton) | |
Standard carton gross weight | 16.4kg | |
Optional accessories | Scope probe, AC power adaptor |
Based on 0 reviews
Be the first to review “UT81C Scope Digital Multimeter”
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
-
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a
There are no reviews yet.