YH 852 (BRUSHLESS FAN) Rework Station
Out of stock
| Machine parameter | |||
| Rated voltage | AC 220V±10% 50Hz | ||
| Machine power | 700W±10％（MAX） | ||
| working environment | 0～40℃ relative humidity ＜80％ | ||
| Storage temperature | －20～80℃ relative humidity ＜80％ | ||
| Machine size | 25.5*18.8*12.5cm | ||
| weight | 3.55KG | ||
| Part of performance parameters | Hot air gun | Soldering iron | |
| Working voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
| Output power | 650W | 60W | |
| temperature range | 100℃～500℃ | 200℃～500℃ | |
| Mode of airflow | brushless fan | — | |
| airflow | 120L/min(max) | — | |
| Temperature stability | ±15℃ （static） | ±10℃ （static） | |
| Display | two LED (red/green) | — | |
| heater | Heating core ceramics heater | common heater | |
| Tips to ground impedance | — | ＜2Ω | |
| Tips voltage to ground | — | ＜2mV | |
₨8,159 ₨8,555
Out of stock
CompareCommon features of the handle of the brushless fan type hot air gun:
(a) The brushless-motor fan for the hot air gun has a standard service life of 20000 hours. The airflow is soft, uniform and heavy.
(b) The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
(c) The outlet steel cylinder of the handle and the hot air gun nozzle are made of superior stainless steel with better conductivity and strong oxidation resistance;
| Weight | 3.5 kg |
|---|---|
| Dimensions | 25 × 19 × 12 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 852 (BRUSHLESS FAN) Rework Station”
-
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Tools and Hardware
JM X4 Magnetic Watch
Wristband design, easy and comfortable to use, doesn’t affect any movement.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Put components on the wristband anytime you want, prevent components from missing.
Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
Hook and loop strap design, easy and comfortable to wear.SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-I Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. Energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
IR Thermo Meters
UT309E Professional Infrared Thermometer
Specifications UT309E Temperature range -35℃~850℃ -31℉~ 1562℉ Accuracy ≥0℃: ±1.8℃ or ±1.8% <0℃: ±(1.8℃+0.1℃/℃) ≥32℉: ±3.6℉ or ±1.8% <32℉: ±(3.6℉+0.1℉/℉) D:S ratio 20:01 Response time <250ms Emissivity 0.95 (default); 0.1~1.0 (adjustable) Spectral response 8um~14um Laser power < 1mW Features Auto power off √ Low battery indication √ LCD display Color EBTN High/low LED alarm √ Data hold √ ℃/℉ selection √ MAX/MIN/AVG/DIFF mode √ Lock measurement √ Dual lasers √ Data storage with date and time 99 Scheduled measurement √ Monitoring measurement √ Protective function √ Operating temperature 0℃~50℃ (32℉~122℉) Storage temperature -20℃~60℃ (-4℉~140℉) Operating humidity <90%RH (non-condensing) Drop test 3m IP rating IP65 General Characterisitics Power 9V battery Display 32mm x 32mm Product color Red and grey Product net weight 292g Product size 189mm x 118mm x 55mm Standard accessories Battery, carrying bag Standard individual packing Gift box, blister, English manual Standard quantity per carton 10pcs Standard carton measurement 475mm x 335mm x 325mm Standard carton gross weight 5.8kg SKU: n/a
Related products
-
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a
There are no reviews yet.