-8%

YH 853D 2A Rework Station All IN 1

Add to Wishlist
Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection

₨20,400 ₨22,111

Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection
Category:
Weight 4 kg
Dimensions 25 × 19 × 14 cm

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

 

 

Iron parts

  

Gun parts

  

DC power supply partsA
 

work Voltage :AC:26V±10% 50HZ

  

work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)

  

work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)
 

Output power:50W±10%

  

Output power:600W±10%

  

Output power:15W/30W
 

Temperature range:200°C-480°C

  

Temperature range:100°C-480°C

  

Output voltage:0-15V
 

Temperature stability:±2°C

  

Temperature stability:±2°C

 Load stability:<0.01±2mv
 

Tip of ground impedance<2ohm

 Gun type:Diaphragm pump

Airflow is focus on it,24L~28L/Min

  

recovery time:<100us
Tip of ground voltage: <2mV Gun heater resistance:90Ω  

Ripple dB<1mvrms (virtual value)
Iron Heater material: Common heater  

Gun heater material:Nickel-alloys

  

Temperature coefficient:<300PPm/°C
Iron handle:Black handle  

Protection starting current:>standard value 10%

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 853D 2A Rework Station All IN 1”

There are no reviews yet.

  • YH 1502DD DC POWER SUPPLY

    YH 1502DD DC POWER SUPPLY

    0 out of 5
    (0)
    Parameters
    Rated voltage AC220V±10%  50Hz
    Power of complete machine 15W
    Operating environment 0～40℃  relative humidity＜80％
    Storage temperature －20～80℃  relative humidity＜80％
    Dimensions of the machine body 17*21*16.5cm
    Weight 1.61KG
    Performance parameters
    Output voltage Adjustable continuously within 0～15V
    Output current Adjustable continuously within 0～1A (current limitation adjustment when above 0.2A)
    Output power 15W
    Source effect ≤1mV
    Load effect ≤0.33%
    Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms
    Display accuracy 0.1V/0.1A/1mA
    Protection mode Over-current, short circuit, over-temperature protection
    SKU: n/a
    ₨4,532 ₨5,206
    Add to cart
    Add to Wishlist
    Compare

  • UT 659D LED Tester

    UT 659D LED Tester

    0 out of 5
    (0)
    Specifications Range UT659D
    Certifications CE/RoHS
    Output voltage 24V √
    300V √
    Output current 2mA √
    30mA √
    Continuity Output voltage: 5V (DC)
    Measuring resistance: 0~99.9Ω
    Input range 85V to 265V @ 50/60Hz
    Backlight function constant on
    Safety protection High-impedance open circuit
    Operating temperature 0°C~40°C
    Storage temperature  -10°C~50°C
    Relative humidity <80% RH
    Operating altitude ≤2000m
    Drop protection 1m
    Category ratings CAT II 300V
    General Characterisitics
    Power AC 85V~260V， 50Hz/60Hz
    Display 60mm x 35mm
    Product net weight 175g
    Product size 150mm x 56mm x 42mm
    Standard accessories Power cable, test leads,  English manual
    Standard individual packing Gift box, blister
    Standard quantity per carton 20pcs
    Standard carton measurement 345mm x 335mm x 245mm
    Standard carton gross weight 7.7kg
    SKU: n/a
    ₨9,000 ₨10,900
    Add to cart
    Add to Wishlist
    Compare

  • YH 938D SMD STATION

    YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
    ₨16,800 ₨18,000
    Add to cart
    Add to Wishlist
    Compare

  • YH 947-VII Soldering Iron

    YH 947-VII Soldering Iron

    0 out of 5
    (0)

    1.Small size, light weight, easy to carry.

    2.Use the internal heating type heating core, high efficiency.

    3.947VII temperature adjustable.

    4.947VII with a power switch, when the appliance is not in use, you can turn off the

    switch, safe and energy saving.

    5.The internal use SMT double-sided board manufacturing process, the process is neat

    and the solder joint is firm.

    6.The handle uses completely new environmental protection material, safe and durable.

    SKU: n/a
    ₨1,710 ₨2,238
    Read more
    Add to Wishlist
    Compare

  • YX 960 Analog Multimeter

    YX 960 Analog Multimeter

    China Brand
    0 out of 5
    (0)
    • Excellent DC resolution factor of 2mV
    • Expended resistance measurement of 20 to200M
    • Series capacitor DC to enable measurement of only AC components
    • A large and bright meter with a scale length of 80mm
    • The sensitivity of 44pA at full scale
    • Fuse and Diode protection
    • Measure HFE of transistor directly
    SKU: n/a
    ₨1,127 ₨1,630
    Read more
    Add to Wishlist
    Compare

  • YH 898BD+ REWORK STATION

    YH 898BD+ REWORK STATION

    0 out of 5
    (0)
    Machine parameter
    Rated voltage AC 220V±10%  50Hz
    Total Power 730W
    300℃ Constant Temperature Power

    (High-Speed PID Programmed to

    Energy Savings)

    		 250W±10％
    Operating Environment 0～40℃ Relative humidity＜80％
    Storage temperature －20～80℃  Relative humidity＜80％
    Dimensions 13.5*15*10cm
    weight 2.65KG
    SKU: n/a
    ₨13,680 ₨14,840
    Add to cart
    Add to Wishlist
    Compare

Related products

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

  • YH 938D SMD STATION

    YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
    ₨16,800 ₨18,000
    Add to cart
    Add to Wishlist
    Compare

  • YH 706 REWORK STATION

    YH 706 REWORK STATION

    0 out of 5
    (0)
    Model 706 872D+
    Power Consumption 720W 720W
    Measurement 124*187*157MM 124*187*157MM
    Weight 4.5KG 4.8KG
    Working environment 0~50°C 0~50°C/0~122°F
    Storage environment -20-80°C -20-80°C
    Hot Air Reworks
    Airflow type dual-turbo blower diaphragm pump spiral wind
    Air Flow ≤168L/min ≤24L/min
    Temperature Range 100°C-480°C 100°C-480°C
    Temperature Stability ±1°C ±1°C
    Display Type Digital Display Digital Display
    Handle length ≥90CM ≥90CM
    Soldering Iron
    Temperature Range 200°C-480°C 200°C-480°C
    Temperature Stability ±2°C ±2°C
    Tip of ground voltage <2mv<> <2mv<>
    Tip ground impedance <2 ohm <2 ohm
    Display Type Digital Display Digital Display
    Handle length ≥100CM ≥100CM
    SKU: n/a
    ₨13,080 ₨16,658
    Read more
    Add to Wishlist
    Compare
  • ,

    YH 946A-III Touch Seperator

    ,

    YH 946A-III Touch Seperator

    0 out of 5
    (0)

    1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.

    2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.

    3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.

    4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.

    SKU: n/a
    ₨18,500 ₨27,414
    Add to cart
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447