- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
Weight | 4 kg |
---|---|
Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
Iron parts |
Gun parts |
DC power supply partsA |
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
Iron handle:Black handle |
Protection starting current:>standard value 10% |
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10%(MAX) working environment 0~40℃ relative humidity <80% Storage temperature -20~80℃ relative humidity <80% Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃~500℃ 200℃~500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ (static) ±10℃ (static) Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — <2Ω Tips voltage to ground — <2mV SKU: n/a -
Clamp Meters
UT 206B Digital Clamp Meter
Specifications Range UT206B AC current (A) 1000A ±(2%+5) AC current frequency response 50Hz~60Hz Inrush current (A) 1000A ±(10%+10) AC voltage (V) 6V ±(1.2%+3) 60V/600V/1000V ±(1%+8) DC voltage (V) 600mV ±(0.8%+3) 6V/60V ±(0.5%+5) 600V ±(0.5%+5) 1000V ±(0.5%+5) Low pas filter (LPF ACV) 600V/1000V ±(2%+5) AC voltage frequency response 40Hz~400Hz LoZ ACV 600V/1000V ±(2%+5) Resistance (Ω) 600Ω ±(1%+3) 6KΩ/60KΩ/600KΩ ±(1%+2) 6MΩ/60MΩ ±(2%+8) Capacitance (F) 60nF ±(4%+25) 600nF/6μF/60μF/600μF ±(4%+5) 6mF/60mF ±(10%+9) Temperature (℃) -40℃~300℃ ±(1%+20) 300℃~1000℃ ±(1%+2) Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3) Duty cycle (%) 10%~90% ±(2.6%+7) Features Display count 6000 Jaw opening 42mm Current frequency 50Hz~60Hz High voltage frequency 40Hz~400Hz Analog bar 31 Auto power off √ Continuity test √ Auto/Manual range √ Low battery indication √ Diode test √ Relative mode/Data hold √ MAX/MIN √ Function selection √ Flashlight √ Wake-up function √ Auto power off current: <50μA √ Flexible current probe (optional) Extends to 3000A √ Input impedance (ACV/DCV) ≥10MΩ √ General Characteristics Power 1.5V battery (R03) x 3 Display 43mm x 45mm Product color Red and grey Product net weight 465g Product size 272mm x 81mm x 43.5mm Standard accessories Test leads, batteries, point contact temperature probe Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 10pcs Standard carton measurement 355mm x 330mm x 315mm Standard carton gross weight About 7.1kg SKU: n/a -
Soldering Irons, Tools and Hardware
YH 947-II Soldering Iron
1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel.While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.
2.Electric iron overall stability is much higher.
3. energy-efficient, while rapid heating, cutting temperature recovery performance.
4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.
5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
7. Adopt a common device design, easy to replace devices
SKU: n/a -
-
There are no reviews yet.