-8%

YH 853D 2A Rework Station All IN 1

Add to Wishlist
Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection

₨20,400 ₨22,111

Compare
  • 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
  • 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
  • 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
  • 4). Hot air rework, soldering iron are equipped by variety of fault protection
Category:
Weight 4 kg
Dimensions 25 × 19 × 14 cm

Technical data:

Rated voltage:  AC 220V±10% 50HZ ( 110V±10% 50HZ)

Whole machine  Power Consumption:  ≤800W

Work environment:  0-50°C

 

 

Iron parts

  

Gun parts

  

DC power supply partsA
 

work Voltage :AC:26V±10% 50HZ

  

work Voltage:  AC:220V±10% 50HZ\( 110V±10% 50HZ)

  

work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ)
 

Output power:50W±10%

  

Output power:600W±10%

  

Output power:15W/30W
 

Temperature range:200°C-480°C

  

Temperature range:100°C-480°C

  

Output voltage:0-15V
 

Temperature stability:±2°C

  

Temperature stability:±2°C

 Load stability:<0.01±2mv
 

Tip of ground impedance<2ohm

 Gun type:Diaphragm pump

Airflow is focus on it,24L~28L/Min

  

recovery time:<100us
Tip of ground voltage: <2mV Gun heater resistance:90Ω  

Ripple dB<1mvrms (virtual value)
Iron Heater material: Common heater  

Gun heater material:Nickel-alloys

  

Temperature coefficient:<300PPm/°C
Iron handle:Black handle  

Protection starting current:>standard value 10%

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YH 853D 2A Rework Station All IN 1”

There are no reviews yet.

  • ,

    JM CT4-1 PLIER

    ,

    JM CT4-1 PLIER

    0 out of 5
    (0)
    • Plastic coated metal handle, precision blades for clean cuts on wires
    • It is suitable for cutting the RJ45 network wire and RJ11 telephone wire.
    • Comes with a wire stripper, it is perfect for you to strip the wire.
    SKU: n/a
    ₨1,500 ₨1,700
    Add to cart
    Add to Wishlist
    Compare

  • JM X4 Magnetic Watch

    JM X4 Magnetic Watch

    0 out of 5
    (0)

    Wristband design, easy and comfortable to use, doesn’t affect any movement.
    Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
    Put components on the wristband anytime you want, prevent components from missing.
    Strong magentic board is made of permanent magnet, strong magnetism, long service life and efficient adsorption.
    Component storage slot design, can be used as temporary storage for small components and magnetize screwdriver.
    Hook and loop strap design, easy and comfortable to wear.

    SKU: n/a
    ₨844 ₨1,208
    Add to cart
    Add to Wishlist
    Compare

  • UT 208 CLAMP METER

    UT 208 CLAMP METER

    0 out of 5
    (0)

    1. 1000A AC/DC current measurement, 3 times/s sampling rate

    2. True RMS
    3. Inrush current
    4. Zeroing function
    5. Full icon display
    6. MAX/MIN
    7. Data hold; Duty cycle
    8. Auto power off and low battery indication
    9. Point contact temperature probe
    10. Diode; Continuity buzzer; Input Impedance for DCV
    SKU: n/a
    ₨22,200 ₨24,556
    Add to cart
    Add to Wishlist
    Compare

  • UT 133A Digital Multimeter

    UT 133A Digital Multimeter

    0 out of 5
    (0)
    Specifications Range UT133A
    DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3)
    AC voltage (V) 600V ±(0.7%+3)
    DC current (A) 600uA/60mA/600mA/10A ±(1%+3)
    AC current (A) 10A ±(1.2%+3)
    Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2)
    Capacitance (F) 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF ±(4%+5)
    Frequency (Hz) 10.00Hz~1.000MHz ±(0.1%+5)
    Temperature (℃) ‒40℃~1000℃ ±(1%+4)
    Temperature (℉) ‒40℉~1832℉ ±(1.5%+5)
    Features
    Display count 6000
    Range selection Auto
    Diode √
    Continuity buzzer √
    NCV √
    LCD backlight √
    Test probe holder √
    Data hold √
    Low battery indication √
    Overload indication √
    General Characteristics
    Power 1.5V battery (R03) x 2
    Display 56.8mm x 36.1mm
    Product color Red and grey
    Product net weight 255g (with batteries)
    Product size 155mm x 76.5mm x 49mm
    Standard accessories Manual, test leads, K-type thermocouple
    SKU: n/a
    ₨5,760 ₨6,100
    Add to cart
    Add to Wishlist
    Compare

  • UT L30 Meter Lead

    UT L30 Meter Lead

    0 out of 5
    (0)

    ● Leads length: 900mm, Rod length: 136mm

    ● Tip length: 15.7mm
    ● Safety level: CAT III 1000V/CAT IV 600V 10A
    ● Safety certificate: EN 61010-031 A1:2015
    ● Features and application: Double insulated UL authenticated
    SKU: n/a
    ₨1,052 ₨1,185
    Add to cart
    Add to Wishlist
    Compare

  • UT 206B Digital Clamp Meter

    UT 206B Digital Clamp Meter

    0 out of 5
    (0)
    Specifications Range UT206B
    AC current (A) 1000A ±(2%+5)
    AC current frequency response 50Hz~60Hz
    Inrush current (A) 1000A ±(10%+10)
    AC voltage (V) 6V ±(1.2%+3)
    60V/600V/1000V ±(1%+8)
    DC voltage (V) 600mV ±(0.8%+3)
    6V/60V ±(0.5%+5)
    600V ±(0.5%+5)
    1000V ±(0.5%+5)
    Low pas filter (LPF ACV) 600V/1000V ±(2%+5)
    AC voltage frequency response 40Hz~400Hz
    LoZ ACV 600V/1000V ±(2%+5)
    Resistance (Ω) 600Ω ±(1%+3)
    6KΩ/60KΩ/600KΩ ±(1%+2)
    6MΩ/60MΩ ±(2%+8)
    Capacitance (F) 60nF ±(4%+25)
    600nF/6μF/60μF/600μF ±(4%+5)
    6mF/60mF ±(10%+9)
    Temperature (℃) -40℃~300℃ ±(1%+20)
    300℃~1000℃ ±(1%+2)
    Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3)
    Duty cycle (%) 10%~90% ±(2.6%+7)
    Features
    Display count 6000
    Jaw opening 42mm
    Current frequency 50Hz~60Hz
    High voltage frequency 40Hz~400Hz
    Analog bar 31
    Auto power off √
    Continuity test √
    Auto/Manual range √
    Low battery indication √
    Diode test √
    Relative mode/Data hold √
    MAX/MIN √
    Function selection √
    Flashlight √
    Wake-up function √
    Auto power off current: ＜50μA √
    Flexible current probe (optional) Extends to 3000A √
    Input impedance (ACV/DCV) ≥10MΩ √
    General Characteristics
    Power 1.5V battery (R03) x 3
    Display 43mm x 45mm
    Product color Red and grey
    Product net weight 465g
    Product size 272mm x 81mm x 43.5mm
    Standard accessories Test leads, batteries, point contact temperature probe
    Standard individual packing Gift box, carrying bag, English manual
    Standard quantity per carton 10pcs
    Standard carton measurement 355mm x 330mm x 315mm
    Standard carton gross weight About 7.1kg
    SKU: n/a
    ₨16,800 ₨16,895
    Add to cart
    Add to Wishlist
    Compare

Related products

  • YH 8508D Hot Air Rework Station

    YH 8508D Hot Air Rework Station

    0 out of 5
    (0)
    • 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
    • 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
    • 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
    • 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
    • 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
    • 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
    • 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
    SKU: n/a
    ₨10,800 ₨11,846
    Add to cart
    Add to Wishlist
    Compare

  • YH 948D Soldering Iron

    YH 948D Soldering Iron

    0 out of 5
    (0)

    YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..

    Features Of YIHUA 948D 130W High-frequency Desoldering Station:

    • Adopts PID programmable temperature control technology
    • Equipped with a suction pen to help remove IC.
    • The anti-static design prevents electrostatic component damage or leakage.
    • Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
    • A portable built-in vacuum with strong suction does away with external vacuum systems.

     

    SKU: n/a
    ₨41,458 ₨46,067
    Read more
    Add to Wishlist
    Compare

  • YH 939D+ SOLDERING STATION

    YH 939D+ SOLDERING STATION

    0 out of 5
    (0)
    PARAMETROS
    MODEL 939D+
    RATED VOLTAGE AC 220V±10%  50Hz
    OUTPUT POWER 75W
    Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％
    Withstand voltage and insulation tests AC1500V 0.4A 60S
    Operating Environment 0～40℃  relative humidity＜80％
    Storage environment －20～80℃  relative humidity＜80％
    Body size 14.5*12*8CM
    Weight 2.17KG
    Work voltage AC 26V±10%  50Hz
    Temperature range 200℃～480℃
    Temperature Stability ±1℃（Static）
    Display Mode LED Digital Display
    Calibration Mode PID Digitally Programmed Calibration
    PID Temperature Calibration Cycle 100MS
    Heating Core Imported High-Powered Heating Core
    Tip-to-Ground Impedance ＜2Ω
    Tip-to-Ground Voltage ＜2mV
    SKU: n/a
    ₨8,764 ₨10,900
    Read more
    Add to Wishlist
    Compare

  • YH 853D 5A-II ALL IN 1 REWORK STATION

    YH 853D 5A-II ALL IN 1 REWORK STATION

    0 out of 5
    (0)

    A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more

    SKU: n/a
    ₨35,009 ₨36,853
    Read more
    Add to Wishlist
    Compare
Got Questions ? Call us 24/7! 03324478447
© Mart pakistan.com , best price in pakistan - All Rights Reserved
Got Questions ? Call us 24/7! 03324478447