A 45 watt output soldering iron with temp range of 200°C – 480°C.You can also program the soldering iron to go into a “Sleep Mode” after your desired minutes of non-use (2,5,10 or 20minutes). Hot air gun can also be switched to be used in either a “Manual or Automatic Mode” and the hot air gun also has an “Automatic Cool Off Feature” which means that the hot air gun will go into a “Cool Off Period”. After it has been placed into its holder and has cooled off to a temperature of 100 Degrees Centigrade, it will enter a Standby Mode and the air will keep flowing. When it has cooled down to 100 Degrees Centigrade, the air will stop flowing and then you will know it is safe to turn the unit off.
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption | 700W |
Gun temperature | 100-480oC |
Gun type | Brushless fan |
Air flow | 120L/MIN |
Gun heater material | Ferro-alloys |
Gun heater resistance | 74Ω |
Soldering iron temperature range | 200-480oC |
Soldering iron type | Blue type |
Soldering iron cable | Silicagel line |
Soldering iron heater material | high-quality heater |
Soldering iron heater resistance | 15Ω |
Inner box dimension(cm) | 29*20*18 |
Outer box dimension(cm) | 59.5*41*36 |
Outer carton box Q’TY | 8PCS/CTN |
Prodcut weight | 2.75KG/PC |
₨14,880 ₨19,476
Weight | 2.7 kg |
---|---|
Dimensions | 29 × 20 × 18 cm |
Based on 0 reviews
Be the first to review “YH 899D REWORK STATION”
-
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test <30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a
There are no reviews yet.