-8%
Rework & Soldering Station
YH 992D A+ 3 IN 1 REWORK STATION
| parameters | |||
| Rated voltage | AC 220V±10% 50Hz | ||
| power | 720W±10％（Max） | ||
| 300℃ Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 250W±10％ | ||
| Working environment | 0～40℃ relative humidity＜80％ | ||
| Storage environment | －20～80℃ relative humidity＜80％ | ||
| Dimensions | 255*188*125mm | ||
| Weight | 5.11KG | ||
| Parts parameters | Hot air gun | Soldering iron | |
| Operating Voltage | AC 220V±10% 50Hz | AC 26V±10% 50Hz | |
| Output power | 550W | 75W | |
| Temperature range | 100℃～480℃ | 200℃～480℃ | |
| Air Supply Mode | Diaphragm pump | — | |
| Air Flow | 28L/min(MAX) | — | |
| Temperature Stability | ±1℃ （Static） | ±1℃ （Static） | |
| Display Mode | LCD display | LCD display | |
| Calibration Mode | The PID digital program
proofreading |
The PID digital program
proofreading |
|
| PID Temperature Calibration Cycle | rapidly 20ms | high-speed 100ms | |
| Heating Core | Ceramic columned heating element. | Imported heater | |
| Standard nozzles/tips | (3mm,5mm,8mm,10mm,13mm)
5PCS nozzles |
B | |
| Tip ground impedance | — | ＜2Ω | |
| Tip of ground voltage | — | ＜2mV | |
₨37,560 ₨40,802
1.The air gun/soldering iron features -50ºC to +50ºC temperature compensation
2.The air gun/soldering iron features ºF/ºC conversion
3.The air gun features manual/automatic work mode conversion4.The soldering iron features a sleep function that can be set from 0-99 minutes.YIHUA992DA+ upgrade version have all above YIHUA992DA basic function, also additional below function :A)Three section temperature storage mode (able to store hot air gun temperature, soldering iron temperature, air volume, temperature correction, automatic hibernation, automatic and manual mode, etc. These three sections can be switched freely).B)Cold air function added, able to switch between hot air and cold air.
| Weight | 5.11 kg |
|---|---|
| Dimensions | 25 × 19 × 12 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 992D A+ 3 IN 1 REWORK STATION”
-
Wire & Cable Testers
UTP 04 100MHZ PROBE
Features Of UNI-T Best Passive Probe 100MHz UTP04:
This passive probe is good oscilloscope accessories, it is suitable for oscilloscope.
Stable performance and not easy to break.
This can provide a professional and accurate measurement.
Widely used, it can satisfy most peoples.
A good helper for instrument engineer.
SKU: n/a -
Rework & Soldering Station
YH 899D REWORK STATION
Power consumption 700W Gun temperature 100-480oC Gun type Brushless fan Air flow 120L/MIN Gun heater material Ferro-alloys Gun heater resistance 74Ω Soldering iron temperature range 200-480oC Soldering iron type Blue type Soldering iron cable Silicagel line Soldering iron heater material high-quality heater Soldering iron heater resistance 15Ω Inner box dimension(cm) 29*20*18 Outer box dimension(cm) 59.5*41*36 Outer carton box Q’TY 8PCS/CTN Prodcut weight 2.75KG/PC SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a
Related products
-
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10％（MAX） working environment 0～40℃ relative humidity ＜80％ Storage temperature －20～80℃ relative humidity ＜80％ Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃～500℃ 200℃～500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ （static） ±10℃ （static） Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — ＜2Ω Tips voltage to ground — ＜2mV SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
There are no reviews yet.