Wire & Cable Testers
TDR-410 Cable Fault Locator
Availability:
Out of stock
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
₨0
Out of stock
Compare- Location damaged power cables.
- Fault location copper telecom cables.
- Coaxial cable fault location.
- Fault location wiring infrastructure.
- Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
- Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.
Dechnical data:
- Ranges Meters: 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 4km
- Ranges Feet: 20, 45, 90, 180, 360, 750, 1500, 3000, 6000, 10000, 14000.
- Range Selection: Manual range control / Auto range.
- Accuracy: 1% of selected range*.
- Resolution: Approx 1% of range.
- Minimum cable lenght: 4m (14ft).
- Sensitivity: Min 3 pixel return at 4km on 0.6mm Ø, PE, TP.
- Velocity Factor: Adjustable from 1% to 99%.
- Output Pulse: 5 volts peak to peak into open circuit.
- Output Impedance: Selectable 25, 50, 75 & 100 Ω.
- Output Pulse: Width 3 ns to 3 µs, Automatic with range.
- Scan Rate: 2 scans/second or scan held, pre set for each range scale.
- Tone Generator: 810 – 1100Hz.
- Battery Life: 30 hours continuous scanning.
- Power Supply: 6 volts 4 x 1.5 AA Alkaline cells, on-screen low voltage indicator.
- Power Down Selectable: 1, 2, 3, 5 minutes or disabled.
- Back Lit Display: 128 x 64 pixel.
- Voltage Protection: 250 volts AC.
- Operating Temp: -10º / 50ºC.
- Storage Temp: -20º +70° C.
- Dimensions: 165 x 90 x 37 mm (6.5 x 3.5 x 1.5 ins).
- Weight: 350 g (12oz).
- Safety: IEC 61010-1, EN 60950.
- EMC: BS/EN 61326-1.
- Water/Dust Proof: IP54
Brand
SONEL
Based on 0 reviews
Be the first to review “TDR-410 Cable Fault Locator”
-
Clamp Meters
CLAMP METER AC BM 5266
Features: 1. 1999 Counts and All-In-One: It can display 1999 counts and measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 2. Clear to Read: With large LCD display and data hold function, easy to read and record data. 3. Wide Application Range: It is a perfect tool for laboratory, factory, home and other fields. 4. Easy to Read: With large LCD display and data hold function, easy to read and record data. 5. More advantages: data retention, low battery indication, auto power off and auto negative indication. Description: 1. This BM5266 is a portable digital clamp meter, high reliability, high accuracy and portability, a perfect tool for laboratory, factory, home and other fields. 2. Can measure ac/dc voltage, ac current, resistance, capacitance, phase, diode and continuity tests. 3. More advantages such as data retention, low battery indication, auto power off and auto negative indication. Specifications: Model Number: bm5266 Display: 1999 counts Low battery indication: yes Automatic negative indication: yes Continuity test: yes DC voltage: 600v ±(0.5% 5) AC current: 2a/20a/600a ±(1.9% 10) Capacitance: 200uf ±(3.0% 5) Product Size: 195x63x34mm Color: gray and red Data retention: yes Auto power off: yes Diode test: yes Phase test: yes AC voltage: 600v ±(1.2% 5) Resistance: 2000unf/2mψ ±(0.8% 5) Power supply: 9v 6f22 battery (not included) Product weight: 183g package information: Package Size: 20.5x9.5x4cm / 8.1x3.7x1.6in. Package weight: 290g / 10.7oz Package list: 1 x bm5266 digital cuff gauge 2 x test pen cable 1x User ManualSKU: n/a -
Clamp Meters
CLAMP METER AC MT 87
- ) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm
- 1) 3 1/2 digits LCD with a Max. Reading of 1999
- 2) Diode and Buzzer function
- 3) Low battery indication
- 4) Overload protection
- 5) Data hold for easy reading
- 1) DC voltage: 600V (?1.0%)
- 2) AC voltage: 450V ( ?1.2% )
- 3) OHM: 200K? (?1.0%)
- 4) ACA: 20-400A (?2.0%)
- 5) Power supply: (AAA) 1.5V?2
- 6) Data hold: YES
- 7) Dimension 150L?63W?27.5Hmm2
SKU: n/a
Related products
-
Wire & Cable Testers
LKZ-1000 Wires and pipe locator
- Passive or active modes of tracing.
- Detection of underground live wires.
- Detection of underground wires with no voltage (radio mode).
- Detection of underground wires with no voltage using a transmitter (galvanised, inductive or clamp-based connection).
- Tracing metallic or non-conductive pipes using an additional probe.
- Tracing non-conductive pipelines using a “floating” probe.
- Tracing a determined cable.
- Determining the depth of a cable.
SKU: n/a -
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Wire & Cable Testers
UTP 03 60MHZ PROBE
Attenuation ratio: 1× and 10× optional.
Portable design according to ergonomics.
Integral injection moulding makes the usage more flexible and the oscillograph able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of the European Community.
Compatible with domestic and international digital and analogue oscilloscopes in relevant frequency.
Measurement in intermediate and low-frequency signals.
Accessories included by PP series passive voltage rapier.
Adjusting tool: adjusts compensation capacitance to assure the rapier match with oscillograph.
Contractive-type acuminate hook.
12cm earth wire with an alligator clip.
Locating sleeve adapts to IC testing.
Double-nip wire.
SKU: n/a
There are no reviews yet.