UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
UT361 Anemoscopes
10 in stock
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
₨34,800 ₨38,150
10 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 16 × 8 × 3 cm |
Specifications | Range | Best Accuracy |
Model | UT361 | |
Wind Speed Measurement | 2m/s~10m/s | ±(3%+5) |
10m/s~30m/s | ±(3%+8) | |
Wind Count Measurement (CMM) | 0.001~9999 X 100 | √ |
Wind Count Measurement (CFM) | 0.001~9999 X 100 | √ |
Temperature Measurement | 0°C~40°C(32°F~104°F) | ±3°C(±4°F) |
Features | ||
Display Count | 9999 | |
Data Hold | √ | |
Auto Power Off | Around 10 Minutes | √ |
Low Battery Indication | ≤7.2V | √ |
MAX Mode | √ | |
MIN Mode | √ | |
Data Logging | 2044 | |
Auto Record Time Setup | √ | |
Units Switch | √ | |
LCD Backlight | √ | |
Wind Speed Display | Display “ VEL” | √ |
Wind Count Display | Display “ FLOW” | √ |
General Characteristic | ||
Power | 9V Alkaline Battery (6LF22) | |
LCD Size | 57mm X 37mm | |
Product Color | Red and Grey | |
Product Net Weight | 375g | |
Product Size | 162mm X 78mm X 30mm | |
Standard Accessories | Battery, Carrying Bag | |
Standard Individual Packing | Gift Box, English Manual | |
Standard Quantity Per Carton | 40pcs | |
Standard Carton Measurement | 530mm X 420mm X 365mm (0.081 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 21kg |
Based on 0 reviews
Be the first to review “UT361 Anemoscopes”
-
Insulation Tester
HIGH VOLTAGE INSULATION TESTER KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a -
Multimeters
Ut8805e Benchtop Digital Multimeter 5 1/2 Digits Digital Multimeter
Features 1. True 5½-digit reading resolution
2. Up to 5k rdgs/s sampling rate
3.Multiple mathematical operations
4. True-RMS,AC voltage range:750V,AC current range:10A
5. Built-in thermocouple cold junction compensation
6. Arbitrary sensor measurement
7. 1Gb flash memory storage which can support up to 10k data recall
8. With 4.3 inches TFT LCD. Pass/Fail
9. Support USB, GPIB, RS-232C and LAN interface; support USB-TMC, IEEE 488.2 standard, VXI11 and SCPI languageSKU: n/a
There are no reviews yet.