UT383 – Mini Light Meter
UT383 is a mini light meter equipped with photoelectric sensing technology, which can effectively represent light intensity with electrical signals, then processes data and displays the result on LCD. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring light intensity in homes, offices, schools, laboratories, indoor farming, hospitals, and other areas.
₨4,560 ₨5,500
UT383 is a mini light meter equipped with photoelectric sensing technology, which can effectively represent light intensity with electrical signals, then processes data and displays the result on LCD. It is light weight, compact, ergonomic, and user friendly, making it a great tool for monitoring light intensity in homes, offices, schools, laboratories, indoor farming, hospitals, and other areas.
| Weight | 0.1 kg |
|---|---|
| Dimensions | 16 × 5 × 3 cm |
| Functions | Range | Resolution | Accuracy |
| Luminance | 0～9999Lux | 1LUX | ±4%rdg+5dgts |
| ≥10000Lux | 10LUX | ±5%rdg+8dgts | |
| 0～9999Fc | 1Fc | Bit conversion：FC=LUX/10.76 The accuracy of FC does not need to be checked. It is calculated by the formula. Input the same value and convert units to check whether it conforms to FC=LUX/10.76 |
|
| ≥10000Fc | 1Fc | ||
| Measurement Range | 0～200，000 | lux | |
| Sample Rate | 0～9999Fc | 1Fc | 0.5s |
| Overload Indication | OL | ||
| MAX/MIN | MAX/MIN | ||
| Data Hold | HOLD | ||
| LCD Backlight | Yes | ||
| Auto Power Off | 5min | ||
| Low Battery Indication | 3.0~3.5V | ||
| Battery | 4.5V | ||
| Current Consumption | working | mA | ≤30mA |
| Power off | uA | ≤10uA | |
| Working Environment | Temperature | 0～40℃ | |
| Humidity | ≤80%RH | ||
| Storage Environment | Temperature | -20～60℃ | |
| Humidity | ≤75%RH | ||
| Key Functions | |||
| MAX/MIN | Short press to switch between MAX/MIN/QUIT | ||
| LUX/Fc | Short press switch between LUX/Fc | ||
| HOLD/BL | Short press to hold or release data. Long press to turn on/off backlight | ||
Brand
UNI T
Based on 0 reviews
Be the first to review “UT383 – Mini Light Meter”
-
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
AC DIGITAL CLAMP METER KEW 2117R
AC DIGITAL CLAMP METER KEW 2117R
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a
Related products
-
-
Environment Meters
UT363 – Mini Anemometer
UT363 anemometer is a mini wind speed and wind temperature tester. This light weight device is equipped with the latest magnetic sensing technology which can directly display the air flow speed on the LCD display. It is a perfect tool for sport events, wind measurement, navigation, HVAC, and other areas.
SKU: n/a
There are no reviews yet.