● Bandwidth: 70MHz, 100MHz
UPO 2104E Ultra Phosphor Oscilloscope
4 in stock
Specifications | |
Model | UPO2104E |
Bandwidth | 100MHz |
Channels | 4 |
Sampling rate | 1GS/s |
Memory depth | 56Mpts (single channel) |
Waveform capture rate | 83,000wfms/s |
Time base scale (s/div) | 5ns/div~50s/div |
Input impedance | (1MΩ±2%) II (20pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
Waveform record | 65,000 Frames |
Trigger types | Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code |
Waveform operations | A+B, A-B, A×B, A/B, FFT, logic operation, advanced |
Auto measurements | Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). |
Number of measurements | Display 5 measurements at the same time |
Measurement statistics | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency counter | Hardware 6 bits counter (Channels are selectable) |
Standard interfaces | USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) |
General Characteristics | |
Power | 100V~240VAC, 50Hz/60Hz |
Display | 8 inches TFT color LCD Display with WVGA (800×480) resolution |
Product color | White and grey |
Product net weight | 3.5kg |
Product size | 336mm×164mm×108mm |
Standard accessories | Probe×2/4 (1×, 10× switchable), Power cord, USB cable |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 450mm×420mm×280mm |
Standard carton gross weight | 9.7kg |
₨216,000 ₨276,000
4 in stock
CompareWeight | 3.5 kg |
---|---|
Dimensions | 34 × 16 × 11 cm |
Based on 0 reviews
Be the first to review “UPO 2104E Ultra Phosphor Oscilloscope”
-
Arbitary Waveform Generator
UTG962E Function/Arbitrary Waveform Generator
Specifications Model UTG962E Channel 2 Max frequency 60MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~20MHz Ramp 1μHz~400kHz Pulse 1μHz~20MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characterisitics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Clamp Meters
UT 205E 1000A True RMS Digital Clamp Meter
Specifications Range UT205E AC current (A) 1000A ±(2%+5) AC current frequency response 50Hz~60Hz AC voltage (V) 6V ±(1.2%+3) 60V/600V/1000V ±(1%+8) DC voltage (V) 600mV ±(0.8%+3) 6V/60V ±(0.5%+5) 600V ±(0.5%+5) 1000V ±(0.5%+5) AC voltage frequency response 40Hz~400Hz Resistance (Ω) 600Ω ±(1%+3) 6KΩ/60KΩ/600KΩ ±(1%+2) 6MΩ/60MΩ ±(2%+8) Capacitance (F) 60nF ±(4%+25) 600nF/6μF/60μF/600μF ±(4%+5) 6mF/60mF ±(10%+9) Low voltage frequency (Hz) 10Hz~1MHz ±(0.1%+3) Duty cycle (%) 10%~90% ±(2.6%+7) Features Display count 6000 Jaw opening 42mm Current frequency 50Hz~60Hz High voltage frequency 40Hz~400Hz Auto power off √ Continuity test √ Auto/Manual range √ Low battery indication √ Diode test √ Relative mode/Data hold √ MAX/MIN √ Function selection √ Flashlight √ Wake-up function √ Auto power off current: <50μA √ Input impedance (ACV/DCV) ≥10MΩ √ General Characteristics Power 1.5V battery (R03) x 3 Display 43mm x 45mm Product color Red and grey Product net weight 465g Product size 272mm x 81mm x 43.5mm Standard accessories Test leads, batteries, point contact temperature probe Standard individual packing Gift box, carrying bag, English manual Standard quantity per carton 10pcs Standard carton measurement 355mm x 330mm x 315mm Standard carton gross weight About 7.1kg SKU: n/a -
-
Rework & Soldering Station, Touch Seperator
YH 946A-III Touch Seperator
1. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
2. The heated aluminum is smooth and flat, ensuring a uniform surface temperature.
3. This device has the following user-friendly design features:A. Celsius/Fahrenheit temperature display;B. Temperature correction feature.
4. The double-sided internal SMT manufacturing process boasts clean craftsmanship. The signal flow is clear, and the machine is both stable and safe, further improving its performance and adaptability to various harsh environments.
SKU: n/a
There are no reviews yet.