Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.
Oscilloscopes
UPO2102CS Ultra Phosphor Oscilloscope
Availability:
Out of stock
Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.
₨0
Out of stock
CompareModels | UPO2102CS |
Bandwidth | 100 MHz |
Channels | 2 |
Sample Rate | 1GS/s |
Max. Memory Depth | 28Mpts |
Waveform Capture Rate | 50,000wfms/s |
Time Base Scale | 2 ns/div~50 s/div |
Input Coupling | (1MΩ± 1%)||(13 pF± 3 pF) |
Vertical Scale | 1mV/div~20 V/div(1 MΩ) |
DC Gain Accuracy | ±3% |
Waveform Record | 65,000 Frames |
Trigger | Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB |
Bus Decode | Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB |
Waveform Operation | A+B、A-B、A×B、A/B、FFT、Editable Advanced |
Auto Measurement | Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1. |
Number of Measurements | Display 5 measurements at the same time |
Measurement Statistic | Average, Max, Min, Standard Deviation, Number of Measurements |
Frequency Counter | Hardware 6 bits counter (Channels are selectable) |
Standard Interface | USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail) |
General Characteristic | |
Power | 100V~240VACrms, 45Hz~440Hz |
Display | 8 inches, TFT LCD, WVGA(800×480) |
Product Color | White and Gray |
Product Net Weight | 3.5 Kg ± 0.2 Kg |
Product Size (W×H×D) | 336mm × 163.8mm × 105mm |
Standard Accessories | Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD |
Standard Individual Packing | Gift Box, English Manual |
-
Insulation Tester
MIC-5001, 5000V Insulation Tester
Insulation resistance measurement in a compact, light-weight, low-cost design.
- Measurement to 5 TΩ
- Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
- Continuous indication of insulation resistance or leakage current
- Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
- Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
- Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
- Continuous display of test voltage during the measurement
- Protection against measuring live objects
- Two and three-lead measurement method
- Ramp Test Insulation resistance measurement
- Measurement of breakdown voltage with increments up to 1 kV / s
- Measurement of alternating and direct voltages from 0 V to 750 V
- 990 cells of memory (11880 records) to record results
- Data transfer to PC via USB cable
- Built-in rechargeable battery pack
- Meets the requirements of the EN 61557 standard
- Charge from optional car lighter (12 V) socket accessory
SKU: n/a