UPO2102CS Ultra Phosphor Oscilloscope

Availability:

Out of stock


Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

0

Out of stock

Compare

Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

SKU: UT21P02CSO Category:
Models UPO2102CS
Bandwidth 100 MHz
Channels 2
Sample Rate 1GS/s
Max. Memory Depth 28Mpts
Waveform Capture Rate 50,000wfms/s
Time Base Scale 2 ns/div~50 s/div
Input Coupling (1MΩ± 1%)||(13 pF± 3 pF)
Vertical Scale 1mV/div~20 V/div(1 MΩ)
DC Gain Accuracy ±3%
Waveform Record 65,000 Frames
Trigger Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB
Bus Decode Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB
Waveform Operation A+B、A-B、A×B、A/B、FFT、Editable Advanced
Auto Measurement Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1.
Number of Measurements Display 5 measurements at the same time
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits counter (Channels are selectable)
Standard Interface USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail)
General Characteristic
Power 100V~240VACrms, 45Hz~440Hz
Display  8 inches, TFT LCD, WVGA(800×480)
Product Color White and Gray
Product Net Weight 3.5 Kg ± 0.2 Kg
Product Size (W×H×D) 336mm × 163.8mm × 105mm
Standard Accessories Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD
Standard Individual Packing Gift Box, English Manual

Brand

UNI T

  • CMP-400 Digital Clamp-On Multimeter

    0 out of 5
    (0)

    Additionally:

    • safe, insulated measuring clamps,
    • double molded housing,
    • autoranging/manual range selection,
    • DATA HOLD function, for holding measured values,
    • backlit LCD,
    • REL function,
    • over range indication,
    • AUTO-OFF function.
    SKU: n/a
  • DT 830D DMM

    0 out of 5
    (0)
    SKU: n/a
  • ANALOG MULTIMETER MF 47A

    0 out of 5
    (0)
    Features:
    1. Multifunctional, can measure ac/dc voltage, dc current, resistance, battery test, capacitance, hfe. 2. Buzzer alarm: when it is below 50, it will wake up the alarm. 3. Battery Test: Large measuring range of 1.2-3.6v. 4. Accurate and Reliable: Clear dial, clear measurement results and high efficiency. 5. Audio Level Meter: Designed to measure amplifier gain and transmission losses with given impedant load and the measurement unit is db.
    SKU: n/a
  • EARTH TESTER KEW 4105A

    0 out of 5
    (0)

    • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.
    (unit can be hung from the neck for simplified measurement)
    • The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
    • Dust and drip proof. (designed to IEC 60529 IP54)
    • Earth resistance value can be read directly from the scale.
    • Designed to meet IEC 61010-1 safety standard.
    • Capable of measuring earth voltage.
    • Small and lightweight. Shock resistant new case material.
    • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

    SKU: n/a
  • JM Z16 HEAT INSULATION MAT

    0 out of 5
    (0)

     JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.

    Feature:
    Brand new and high quality.
    Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
    Anti-static coefficient: 1*10E12ohm.
    Units design, easy to keep track of parts.
    Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.

    Accessories:
    Anti-static and heat-proof working mat*1

    SKU: n/a