UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

Availability:

Out of stock


Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

0

Out of stock

Compare

Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

SKU: UP21O02CSMHZ Category:
Models UPO2104CS
Bandwidth 100 MHz
Channels 4
Sample Rate 1GS/s
Max. Memory Depth 28Mpts
Waveform Capture Rate 50,000wfms/s
Time Base Scale 2 ns/div 至50 s/div
Input Coupling (1MΩ± 1%)||(13 pF± 3 pF)
Vertical Scale 1mV/div 至20 V/div(1 MΩ)
DC Gain Accuracy ±3%
Waveform Record 65,000 Frames
Trigger Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB
Bus Decode Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB
Waveform Operation A+B、A-B、A×B、A/B、FFT、Editable Advanced
Auto Measurement Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1.
Number of Measurements Display 5 measurements at the same time
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits counter (Channels are selectable)
Standard Interface USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail)
General Characteristic
Power 100V~240VACrms, 45Hz~440Hz
Display  8 inches, TFT LCD, WVGA(800×480)
Product Color White and Gray
Product Net Weight 3.5 kg ± 0.2 kg
Product Size (W×H×D) 336mm × 163.8mm × 105mm
Standard Accessories Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD
Standard Individual Packing Gift Box, English Manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UPO2104CS 4 Channels Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • MS8910 Smart SMD Tester (R/C)

    0 out of 5
    (0)

    The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
    ● Display 3000 counts
    ● Auto Ranging
    ● Auto Power Off
    ● Data Hold
    ● Low Battery Display
    ● Auto Scanning
    ● Diode Check Open Voltage 2.8V
    ● Diode Testing Current 2mA
    ● Continuity Buzzer <30Ω

    SKU: n/a
  • JM OP015 OPENING TOOL

    0 out of 5
    (0)
    SKU: n/a
  • A25F PM2.5 Meter

    0 out of 5
    (0)

    1. Precise PM2.5 concentration based on pre-calibrated sensors

    2. Temperature measurement (°C/°F)
    3. Humidity measurement
    4. Emoticon display
    5. LCD backlight and red backlight alarm
    6. Battery status, low power, auto power off
    7. Formaldehyde concentration
    SKU: n/a
  • UT275 Clamp Earth Ground Testers

    0 out of 5
    (0)

    UT270 series can measure the grounding system of a circuit without disconnecting the ground wires and auxiliary electrode. It clamps the grounding circuit and measures the grounding resistance fast and safely. It can measure resistance as low as 0.01Ω and has a high resolution of 0.001Ω. It has overload alarm function, which can help to setup the alarm value within the ranges. The clamp has double insulation, which strengthens the anti-interference.

    SKU: 90000
  • TITAN TN 305DS DC Power Supply

    0 out of 5
    (0)

    Operating Conditions

    Supply power: AC 220-240V, 50Hz/60Hz.

    Working Temperature: -10°C ~ 40 °C

    Relative Humidity: ‹ 90%

    Storage Conditions: -10°C ~ 40 °C

    Relative Humidity: ‹ 80%

    Stable Voltage

    The output voltage is between 0 and nominal value continuously adjustable

    Voltage Stability: ≤0.01% +2mV

    Load Stability: ≤ 0.01% +2mV

    Recovery Time: ≤100µS

    Temperature Coefficient: ≤ 200PPM/°C

    Ripple Noise: ≤1 MVRMS(RMS)
    Stable Current

    Power Stability: 0.1% + 3mA

    Load Stability: 0.2% + 3mA

    Ripple Noise : ≤2mArms(RMS)

    The output current is between 0 and nominal value continuously adjustable

    SKU: n/a