UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

Availability:

Out of stock


Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

0

Out of stock

Compare

Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 4;
3、Bandwidth 100MHz,;
4、Memory Depth 28Mpts (Standard);
5、Waveform Capture Rate up to 50,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

SKU: UP21O02CSMHZ Category:
Models UPO2104CS
Bandwidth 100 MHz
Channels 4
Sample Rate 1GS/s
Max. Memory Depth 28Mpts
Waveform Capture Rate 50,000wfms/s
Time Base Scale 2 ns/div 至50 s/div
Input Coupling (1MΩ± 1%)||(13 pF± 3 pF)
Vertical Scale 1mV/div 至20 V/div(1 MΩ)
DC Gain Accuracy ±3%
Waveform Record 65,000 Frames
Trigger Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB
Bus Decode Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB
Waveform Operation A+B、A-B、A×B、A/B、FFT、Editable Advanced
Auto Measurement Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1.
Number of Measurements Display 5 measurements at the same time
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits counter (Channels are selectable)
Standard Interface USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail)
General Characteristic
Power 100V~240VACrms, 45Hz~440Hz
Display  8 inches, TFT LCD, WVGA(800×480)
Product Color White and Gray
Product Net Weight 3.5 kg ± 0.2 kg
Product Size (W×H×D) 336mm × 163.8mm × 105mm
Standard Accessories Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD
Standard Individual Packing Gift Box, English Manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UPO2104CS 4 Channels Ultra Phosphor Oscilloscope”

There are no reviews yet.

  • UT201 CLASSIC

    0 out of 5
    (0)
    SKU: n/a
  • MS8910 Smart SMD Tester (R/C)

    0 out of 5
    (0)

    The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
    ● Display 3000 counts
    ● Auto Ranging
    ● Auto Power Off
    ● Data Hold
    ● Low Battery Display
    ● Auto Scanning
    ● Diode Check Open Voltage 2.8V
    ● Diode Testing Current 2mA
    ● Continuity Buzzer <30Ω

    SKU: n/a
  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • Analog Multimeter YX-360TR, Multimeter Tool for Electric and Electronic Circuit Testing

    0 out of 5
    (0)

    Analog Multimeter YX-360TR, Multimeter Tool for Electric and Electronic Circuit Testing

    SKU: n/a
  • NCV Tester 8848

    0 out of 5
    (0)
    SKU: n/a