UPO3000E series ultra-phosphor oscilloscopes can realize functions of deep storage, high waveform capture rate, real-time waveform recording and playback, multi-level intensity grading display, and more with UNI-T special 3D technology. Some competitive features are, 250MHz/150MHz bandwidth, up to 2.5GS/s real-time sampling rate, 2/4 channels, 70Mpts standard memory depth, higher than 200,000wfms/s waveform capture rate, more than 100,000 waveforms continuous recording and analysis, up to 256 levels intensity grading display. They can be operated with a standard 25MHz dual-channel function/arbitrary waveform generator or an optional digital multimeter module (UT-M12).
UPO3254E Ultra Phosphor Oscilloscope
4 in stock
₨434,256 ₨436,000
4 in stock
CompareWeight | 4.2 kg |
---|---|
Dimensions | 37 × 19 × 12 cm |
Specifications | |
Model | UPO3254E |
Analog bandwidth | 250MHz |
Channels | 4 |
Sampling rate | 2.5GS/s (Single channel), 1.25GS/s (Dual channels/Four channels) |
Memory depth | Each channel: auto, 7kpts, 70kpts, 700kpts, 7Mpts, 70Mpts selectable (open the 4 channels at the same time) |
Waveform capture rate | 200,000wfms/s |
Time base scale (s/div) | 2ns/div~40s/div (Real-time sampling rate, memory depth display)【Step by 1-2-4 stall】 |
Input impedance | (1MΩ±1%) II (18pF±3pF) |
Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% |
Waveform record | Single channel: 100,000 frames; Adjustable interval: 1.00ms~1000s |
Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slope, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
Waveform operations | A+B, A-B, AxB, A/B, FFT, editable advanced and logical operations |
Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, Rise Delay, Fall Delay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in total |
Measurement display | 5 types |
Measurement statistics | Average, Max, Min, standard deviation and number of measurements |
Frequency counter | 6 bits |
Interfaces | Standard: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), VGA Optional: AWG |
General Characterisitics | |
Power | 100V~240V ACrms, 50Hz/60Hz |
Display | 8-inch TFT LCD, WVGA (800 x 480) |
Product color | White and grey |
Product net weight | 4.2kg |
Product size | 370mm x 195mm x 125mm |
Standard accessories | Probe x 2/4 (1x, 10x switchable), power cord, USB interface cable, PC software CD |
Standard individual packing | Carton box |
Standard quantity per carton | 2pcs |
Standard carton measurement | 490mm x 480mm x 300mm |
Standard carton gross weight | 11kg |
Based on 0 reviews
Be the first to review “UPO3254E Ultra Phosphor Oscilloscope”
-
-
Tool Kits
JM 8175 TOOL KIT
Our JM-8175 smartphone screwdriver set is covered by a double-sided outer box with strong magnet parts that will not be easy to fall off when opening the box.
The smartphone screwdriver has an aluminum alloy handle with a 360-degree rotating cap, magnetic connector, and non-slip texture design, which makes it applies to various maintenance scenarios.SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
UT216C 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216C (main features)- 1、600A AC and DC current measurement
- 2、True RMS response for ACV and ACA
- 3、Inrush current function for AC current measurement
- 4、V.F.C function for measuring signal at variable frequency
- 5、Non-contact voltage detection with LED indication
- 6、Flashlight for working at dark environment
- 7、Other functions include Capacitance, Frequency and Temperature measurements
SKU: n/a
There are no reviews yet.