-3%
SMD Tester
UT 116A SMD Tester
Availability:
20 in stock
| Specifications | |
| Model | UT116A |
| Display count | 3000 |
| Resistance | 30MΩ |
| Capacitance | 30mF |
| Diode test | 3V |
| LED/stabilivolt | About 21V/1mA |
| Continuity Test | ＜30Ω |
| DCV | 36V |
| Auto range | √ |
| Auto scan identification | √ |
| Auto power off | √ |
| General Characteristics | |
| Power | 1.5V battery (R03) x 2 |
| Display | 39mm x 20mm |
| Product color | Red and grey |
| Product net weight | About 80g |
| Product size | 204mm x 33mm x 25mm |
| Standard accessories | Battery |
₨6,240 ₨6,413
20 in stock
Compare● 36V DC voltage measurement
● Resistance, capacitance, continuity, diode measurement
● The pen can be rotated by 180°, which is convenient for reading and diode/LED
● Zener diode polarity test
| Weight | 0.1 kg |
|---|---|
| Dimensions | 20 × 3 × 2 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 116A SMD Tester”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
DC Power Supplies
YH 1502D+ DC POWER SUPPLY
Parameters
Rated voltage AC220V±10% 50Hz Operating environment 0～40℃ relative humidity＜80％ Storage temperature －20～80℃ relative humidity＜80％ Dimensions of the machine body 27*14*22cm Weight 1.9KG Performance parameters Output voltage Adjustable continuously within 0～15V Output current Adjustable continuously within 0～2A (current limitation adjustment when above 0.2A) Output power 15W Source effect ≤1mV Load effect ≤0.33% Ripple noise ≤3mVrms（5Hz ~ 1MHz）/≤3mArms Display accuracy 0.1V/0.1A/1mA Protection mode Over-current, short circuit, over-temperature protection Dissipation mode Air cooling SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV＜0.1%+5mV
CC＜0.2%+3mAPower regulation CV＜0.01%+5mV
CC＜0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage ＜0.1%+1digit Current ＜0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
Clamp Meters
UT-CS09A Flex Clamp Sensor
Specifications Range UT-CS09A AC current (A) 30A/300A/3000A ±(3%+5) Frequency response (Hz) 45Hz~500Hz √ Features Flex clamp size UT-CS09A: 25.4cm (10 inches); UT-CS09C: 45.7cm (18 inches) Operating temperature 0℃~50℃ Storage temperature -20°C~60°C Storage humidity ≤80%RH Low battery indication About 3.3V Range selection Manual General Characterisitics Power 1.5V battery (R03) x 3 Product color Red and grey Product net weight 260g Product size 267mm x 119.4mm x 34mm Standard accessories Batteries, BNC adapter Standard individual packing Blister, English manual Standard quantity per carton 10pcs Standard carton measurement 495mm x 405mm x 225mm Standard carton gross weight 7kg SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a
Related products
-
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test ＜50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a
There are no reviews yet.