UT 208 CLAMP METER
10 in stock
1. 1000A AC/DC current measurement, 3 times/s sampling rate
₨22,200 ₨24,556
10 in stock
CompareThese 1000A AC/DC digital clamp meters are stable, safe and reliable with low power consumption. Its full range overload protection and unique appearance design make these clamp meters the ideal tool for maintenance and repair of electrical and power lines up to 1000A AC.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 29 × 10 × 4 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 208 CLAMP METER”
-
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Infrared Thermometer
UT 302A+ Infrared thermometer
Specifications UT302A+ Temperature range -32℃~700℃ -25.6℉~1292℉ Accuracy ≥0℃: ±1.5℃ or ±1.5%; <0℃: ±(1.5℃+0.1℃/℃) ≥32℉: ±3.0℉ or ±1.5%; <32℉: ±(3.0℉+0.1℉/℉) Repeatability 0.7℃ or 0.7% (1.5℉ or 0.7%) D:S ratio 20:1 Response time 250ms Emissivity 0.1~1.0 (adjustable, stores 5 sets of preset values) Spectral response 8um~14um Laser power < 1mW Features Auto power off √ Low battery indication √ LCD display Color EBTN High/low LED alarm √ High/low audible alarm √ Data hold/Lock measurement √ ℃/℉ selection √ MAX/MIN/AVG/DIFF mode √ Data storage with date and time – Scheduled measurement – Backlight √ Operating temperature 0℃~50℃ (32℉~122℉) Storage temperature -20℃~60℃ (-4℉~140℉) Operating humidity <90%RH (non-condensing) Drop test 1m Tripod mounting hole √ General Characterisitics Power 9V battery Display 35mm x 35mm Product color Red and grey Product net weight 310g Product size 172mm x 113.5mm x 53mm Standard accessories Battery, carrying bag Standard individual packing Gift box, blister, English manual Standard quantity per carton 10pcs Standard carton measurement 425mm x 335mm x 365mm Standard carton gross weight 6.65kg SKU: n/a -
Tool Kits, Tools and Hardware
JM-Y03 PLUS 43 in 1 Dual Dynamics Precision Electric Screwdriver
- Ultra-long standby time dual dynamics precision screwdriver: Portable and multifunctional easy to handle repair problems.
- Pocket size lightweight, easy to carry: The battery can be removed and replaced at any time.
- Screwdriver with pen shape design exquisite and flexible.
- Upgraded chip greatly increases efficiency.
- Meet daily maintenance demands.
SKU: n/a -
Blower
Blower SE 555
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden etc.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible workSKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
SKU: n/a
Related products
-
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT281C True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rdedition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Datahold, backlight, auto power off
SKU: n/a -
Clamp Meters
UT216C 600A True RMS Digital Clamp Meters
UT216 series true RMS digital clamp meter is a new-generation practical electrotechnical measurement meter which has the features of high reliability, high safety, automatic range and handheld type, has full-range overload protection and unique appearance design, is more excellent in performance, and is an ideal tool for detection, maintenance and repair of various universities and colleges, smelting, communication, manufacturing, petroleum, national defense, electrical, power and circuit equipment.
UTD216C (main features)- 1、600A AC and DC current measurement
- 2、True RMS response for ACV and ACA
- 3、Inrush current function for AC current measurement
- 4、V.F.C function for measuring signal at variable frequency
- 5、Non-contact voltage detection with LED indication
- 6、Flashlight for working at dark environment
- 7、Other functions include Capacitance, Frequency and Temperature measurements
SKU: n/a
There are no reviews yet.